Gender
Male
About
About Me:
Mechatronics engineer
Please tell us a bit about your UAV interest
Octacopters
Hometown:
Benha
Activity Feed
"thnx alot"
"good hint i guess thanx alot I'll try PID tune"
"ok i'll try this .. but when I tried to fly it was unstable like dancing around it self
I'll re-calibrate sensors if there is any pronblems ill massag u
thank u very much"
I'll re-calibrate sensors if there is any pronblems ill massag u
thank u very much"
"7abiby 'arabic word'... thank u man"
"ok how can I change MAX_THR ^_^
plz send me a screenshot from mission planer if possible
thnx"
plz send me a screenshot from mission planer if possible
thnx"
I have Ardupilot 2.5.1 and I installed the last firmware v3.1.4 Quad to quadcopterI have no throttle control problem- All ESC s calibrated - all ESCs give a good throttle while automatic and manual calibrationI think there is something wron with…
"which exact value of P there is alot of P s ... cause I have the same problem "
"thanks for reply i found flight mode not stabilize and RC signal was not stable
thanx alot"
thanx alot"
"I tried to test it today it had a good stability but the throttle was jerky even when it was at zero percent Motors RPM get high for a sec or more randomly and it slow down again to its normal rate while throttle is on fixed rate,this affects on its…"
I've APM 2.5 with calibrated sensors .... i used it to control a quadcopter ... after arming it gives a crazy throttle itself while radio throttle at zero percent while it had a good balance when testing minuit before- all ESC calibrated- RC…
