Artificial Horizon Changes Size
I just loaded MP 1.2.53 and noticed that every time I close it and open it up again my artificial horizon gets stretched vertically. Has anyone else experienced this perhaps?
Read more…Andre Kotze's Discussions (9)
Sort by
Safe prop clearing distances
Hi all. I'm busy designing a custom HEXA frame and would like to know if there is a minimum safe prop clearing distance to be used? The clearing distance on my QUAD with 11x4.7" props is about 6 inches. Can I make it smaller for my HEXA or not? T
Read more…Arduino 0100-relax Upload Problem
Is anybody else perhaps also having problems uploading code with "Arduino 0100-relax"? I can upload the code just fine from within the Mission Planner but as soon as I open Arduino my red and green lights on the APM stops flashing and when I try to
Read more…Good PID settings for stock frame on v2.3
Does anybody have any good PID settings for a stock frame ArduCopter with 924kv Hacker Style motors perhaps?
Or can anybody please tell me a good way to start tuning these settings and what to look out for? All the documentation on the internet says
Read more…AC2 PID Tuning
How does the PID tuning work? How much do I increase/decrease each time and are the changes reflected in real-time or do I need to click on "Write Params" for them to take effect?
Read more…Waypoint Navigation
How does the waypoint navigation work exactly?
1. Say I've got 5 waypoints programmed but I dont take off from my home location, if I then go into AUTO mode will my quad fly to my home location first and then continue to waypoint 1 or will it skip th
Read more…Battery Voltage Monitor
On my APM Mission Planner I get a reading of 13.654v in the battery tab, however when I measure the voltage of the actual battery I only get 12.4v.
Why is this?
Read more…Onboard Relay and v2.1.0
How do I test the onboard relay with firmware v2.1.0? The relay option is missing from the CLI menu...
I've currently got all my LEDs connect following the instructions on http://diydrones.com/profiles/blogs/led-low-battery-warning-on but I cant se
AC2 Frame Assembly Help Needed
Hi all. Im am busy assembling my AC2 in the X configuration following the instructions on the ArduCopter website and I've noticed that the standoffs for the upper carrier board will be blocking access to the RC header pins and sonar connector.
What d
Read more…