Gender
Male
About
Location
Singapore
About Me:
Aerospace Undergraduate Final Year as of 2010/11
Please tell us a bit about your UAV interest
Final Year Project on Solar Unmanned Aerial Vehicle
Hometown:
Singapore
Activity Feed
People I need some advice if you guys have encounted similar problem as me. I have calibrated the ESC supposedly with the full throttle/no throttle method for all four motors but still, I have one motor that dont exactly spin when i give it a…
"Hey people,
seems like i got... news...
I tried the CLI you suggested,
With all three servos attached, I got:
CH1: 1501 | 1528CH2: 1500 | 1530CH3: 900 | 1508CH4: 1500 | 1544
With out0 and out1; two servos attached, i got:
CH1: 900 |…"
seems like i got... news...
I tried the CLI you suggested,
With all three servos attached, I got:
CH1: 1501 | 1528CH2: 1500 | 1530CH3: 900 | 1508CH4: 1500 | 1544
With out0 and out1; two servos attached, i got:
CH1: 900 |…"
"Sorry for the noob question, How do I check if I have V1.0 or V1.4
The problem of loading new code is with any code; be it LED test, servos dance code or actual APM v1.0. Everytime I need to upload the programme to APM, I need to press and hold…"
The problem of loading new code is with any code; be it LED test, servos dance code or actual APM v1.0. Everytime I need to upload the programme to APM, I need to press and hold…"
Hey people, I have a quick question and I hope anyone experience can help me...... I have assembled and setup everything with the ground control system GCS, RC receiver, ESC, servos, etc. When the onboard xbee is connected, the servos are twitching…
