About

Location

Baja California Norte


Please tell us a bit about your UAV interest

Still hard at work pimping the 2014 X8. (We are having problems installing the wet bar!).


Hometown:

Ensenada, (not far from TJ, the Mexican home of 3DR).


Activity Feed

Baja Brucie replied to hft seeker's discussion closing this thread
"For a heavy lifter and good endurance...
Check out "Bearospace" on Youtube.
Get their plans and roll your own."
Aug 22, 2015
Baja Brucie commented on Sergio O.'s blog post World Drone Viewer (Mexico )
"Please keep us "in the loop".
Timoteo
Ensenada"
Jun 12, 2015
Baja Brucie replied to Bernard J Vanterpool's discussion Help Binding/Programming Taranis Plus to Iris+? in IRIS
"We are having the same problem. If you could, could you send me a link.
It would be most appreciated

Ensenada, MX"
May 2, 2015
Baja Brucie commented on Chris Anderson's blog post Latest pictures from the 3D Robotics Tijuana factory
"Chris.
All of us here in Baja California are proud of you and the 3DR staff.
We've put  little Mexican flags on our vehicles!
Cheers
Timothy (in Ensenada)"
Jan 25, 2015
Baja Brucie left a comment for Stephen Garland
"Love to help but am near the Otay Skunk works in San Diego.

FYI was in the Iris Dev group and now have an Octo X8 and production Iris.
Let us know

Timoteo"
Jul 25, 2014
Baja Brucie replied to Christian Elsen's discussion IRIS with gimbal and tall legs too heavy to fly safely in IRIS
"The weight of an Iris long leg is approximately 35.2 grams (including mounting screw and nut).
35.2gr less Dronehoners leg at 21gr is 14.2gr weight saving per leg.
Changing four legs  gives a net weight reduction of approximately 56.8 grams per…"
Jul 9, 2014
Baja Brucie commented on Chris Anderson's blog post New in the 3DR store: Bluetooth for APM/Pixhawk!
"Successfully completed fleet upgrade ( Octo 2014 and Iris) with 3DR BT. All works well.

But, no more Telem ports. Possibly a future consideration as we strive to further pimp the Octo."
Jul 6, 2014
Baja Brucie replied to F. C. Bearsch's discussion 3dr Y6 flight time poll in Arducopter Y6 Owners
"Even more reliable is Density Altitude (what the wings and props and sometime combustion motors actually derive from the air).
Results are sometimes surprising.
Here is a handy dandy calculator.
Cheers, The Boys in Ensenada"
Jun 23, 2014
Baja Brucie commented on Chris Anderson's blog post New in the 3DR store: Bluetooth for APM/Pixhawk!
"Have ordered two to upgrade our fleet (new Iris and 2014 X8).
They will compliment our Event38 bridge and Nexus 7 combo.
BTW, ...do I smell Apple pie...?

(The boys in Ensenada...)"
Jun 23, 2014
Baja Brucie commented on Chris Anderson's blog post LIDAR-Lite, a cool $79 laser rangefinder for autolanding and terrain following, near crowdfunding target
"Ordered two units on day one.
Will test in our 2014 X8. One forward, one down for starters. Glad to see the Pixhawk support confirmed. Good luck"
Mar 12, 2014
Baja Brucie left a comment on ArduCopter User Group
"Have hopefully backed 2 units.
Plan to use horizontal and vertical  on my 3DR X8 2014 (on order)..
Have heard (unofficially) from on high that Pixhawk is (or will be) compatible but
cannot attest to that yet. Lidar could be a gamechanger.
Syay tuned"
Mar 2, 2014