Gender
Male
About
Location
Amarillo, TX
Please tell us a bit about your UAV interest
Have built ROVs and used a Parrot drone. I'm not interested in stepping up to a more challenging drone and perhaps building my own.
Hometown:
Amarillo Texas
Activity Feed
"What is interesting is whatever the Pixhawk and Mission Planner were sensing about the RC signal is not recognized by the Spectrums Fail safe. I setup the fail safe on the Spektrum and it did not have the intermittent RC drop that I saw in the…"
"I think I have solved the problem. I replace the Spektrum DSMX remote receiver and it seems to have fixed the problem. I am not sure why when the RC drops the rover ignores the fail safe settings and goes into high throttle. I'll work on solving the…"
I am using a Pixhawk2.1, RoboClaw motor controller and Mssion Planner to control a rover. I have most things working well except for one issue I cannot figure out. The PixHawk outputs to the RoboClaw on channels 1 and 3 using skid steering.…
"I did as you said but when the copter came to the waypoint set as DO_JUMP, it started to climb and landed it self after it reached the limit of its geo fence "
I'm trying to make my quad copter repeat a flight path multiple times until I take control with my RC controller. I have tried to do this using way points. The problem is it would fly one pattern and land but not repeat the pattern. Is their any way…
I bought the 3DR video kit with the drone. The video quality has been poor from the first day we started flying. The problem I am having is the video gets a lot of static while flying. The drone can be hovering or moving and the static will show up.…
