Hi Everyone,I am using apm plane v3.5.0 with MP v1.3.37. With regard to the geotagging, the ability to adjust the log offsets has been removed in this version of MP, so I'm not entirely sure which altitude is being used when geotagging.When the AMSL…
Hi everyone,I have a piksi connected to serial 4, configured as gps2 and the standard ublox configured as gps1. I am able to get the piksi into fixed RTK and the gps status shows '5'. My question is that when it comes to geotagging how do I know and…
"Hi Niels and the SwiftNav team,I have recently purchased a Piksi kit to integrate on a Pixhawk running MP V1.3.32, Piksi Console V0.24.2, Piksi firmware V0.20 STM & V0.15 NAP and APM Plane V3.3.0
I have tried two methods, the first being GPS data…"
"Thanks Grant, Attaching a successful flight log now. This flight was conducted between the two crash flights, using manual mode for takeoff and landing.
On the second crash, the machine went in nose first, but I noticed a broken control horn on the…"
Yeah I have been very carefull with the cg. Before the camera was installed I put ballast in place of it for weight and cg test. Throughout all of my flying the cg has been exactly the same, and the aircraft is well under its max weight"
I just used SS to abbreviate 'stratosnapper', the trigger I am using for my camera. The SS has been plugged into the pixhawk for many flights now, without any issues. Now that I have installed a camera and plugged the SS into it (the…"
I have been building a flying wing running a Pixhawk. Up until today, I have been very successful with the build and tuning. The machine has been operating well in all modes and both auto takeoff and landing work well. I have followed the…"
Hi Guys,I have been building a flying wing running a Pixhawk. Up until today, I have been very successful with the build and tuning. The machine has been operating well in all modes and both auto takeoff and landing work well. I have followed the…