I'm trying to use an old iPad 2 running VLC as an external viewer of the Solo live video stream.
The access to this stream is described in the Solo Development Guide under the heading "Video Pipeline." Here is the URL: http://dev.3dr.com/concept-video
Read more…Since November, I've not been able to login to DroneShare from the Tower app, and just yesterday I was surprised to find that "auto takeoff" commanded from Tower to my Iris+ disabled the Pitch and Roll input from the right stick on my controller. (ta
Read more…Iris+ community- here is my first test of "Miniature faking using a Canon P&S camera running CHDK & KAP-UAV script". Camera mounted on my Iris+ quadcopter's hard-mount & hovering in LOITER 160 feet above ground.
There were some gremlins
Read more…OK, so I've got the Channel 8 assigned in the Pixhawk parameters to perform a camera trigger. But, it would seem that channel 8 is not assigned to any switch on the Iris FSTH9X rc xmitter.
any suggestions on how to assign channel 8 to say the "Gear" s
Read more…SOLO Forum-
One item I was very interested in at the IDE was the ITELITE DBS Long Range Antenna (model DBS-03-ver.2) for the Solo. (See http://www.itelite.net/drone/ )
I procured one recently and tested just last weekend. Its certainly does what it say
Read more…I've been wanting to setup my Sony Action Cam (HDR AS-100V) on my Iris+ and use it as an FPV trainer. I've mounted the camera, inverted, off the front mount, and attached the video xmitter per Colin Guinn's setup video. But I've never like
Read more…Happy New Year to the group. I was casually looking through the Hackster site and I discovered my new SOLO has a companion computer connected via a bus that looks very much like that used by the Intel Edison. See Solo teardown pics here
Notice Here o
Read more…Well today I experienced a flyaway while in loiter, and the result was 2 broken arms, both on the right side.
So I proceeded to open up Pandora's box!
Seriously! To replace the arms I need to desolder and resolder the motor and led leads? Son of a bit
Read more…