About

About Me:

I'll tell you later


Please tell us a bit about your UAV interest

I am currently building a hex rotor craft based on Tarot 680P frame, with PixHawk 1  flight controller.

I tried PixHawk firmware, and QGroundControl but I switched to ArduCopter 4.0.7 and Mision Planner.
It's all about the reading and configuring the Parameters! 

8834455283?profile=RESIZE_710xI hope to be flying the HexCapitator in the very near future.   The name is to remind ME to stay away from those blades! 

 


Hometown:

I'm from Mars


Activity Feed

DexterIsMyHero left a comment on PIXHAWK
"As a noob with a PixHawk 2.4.8, I would try using a free serial port first. My familiarity with Arduinos makes me lean toward serial interface.
I understand "companion computers" connect to the USB port, the one located below the TELEM2 port…"
May 10, 2021
DexterIsMyHero left a comment on ArduCopter User Group
"I worked through this on my hexacopter. ArduCopter's numbering of the motors is very specific, not a circle but three diagonals. 1 is the right side, 2 is the left, 3 and 4 are opposite, 5 and 6 are opposite. If you don't have them wired this way…"
Apr 25, 2021
DexterIsMyHero left a comment on ArduCopter User Group
"I had this issue with the Ground unit of a 3DR 915 MHz Telemetry Radio pair. I am running MP on Windows 10, and Telemetry RSSI was always zero, even though the LEDs seemed to indicate a radio connection was made. I had to study the chips on the…"
Apr 25, 2021
DexterIsMyHero left a comment on ArduCopter User Group
"I'm still very new, but I've been working through the same issue. There are pre-requisites for Arming, in the Flight Controller's firmware. I'd suggest going to Full Parameter Tree in MP and looking at the ARM group of parameters. That may give…"
Apr 25, 2021
DexterIsMyHero updated their profile
Apr 25, 2021
DexterIsMyHero liked Geoffrey L. Barrows's blog post Centeye Modular Vision Sensors
Feb 8, 2021
DexterIsMyHero left a comment on PIXHAWK
"Thanks for sharing this photo.
I really enjoy seeing DIY builds, they have opened my eyes to "the possibilities".
I am interested in the props, they seem to have anti-vortex tips.

UAV prop noise can be an issue in public open areas, and…"
Feb 7, 2021
DexterIsMyHero replied to Brett Smith's discussion This site has changed a lot since 2014?
"Hello, I am a newb both here on DIY Drones and in the world of RC Multicopter UAVs.
I think we can thank all those early hackers/programmers/tinkerers for the wealth of available tech today.
I do agree with the idea of these modern websites…"
Feb 6, 2021
DexterIsMyHero is now a member of diydrones
Feb 1, 2021