"Nice update!!I didn't have any real problems with rc7 so will be upgrading to rc8 for the next flights I'm sure.

Great work! You make me very happy with my choice going for the Pixhawk."

"Range is from 0.05 to 0.10: http://copter.ardupilot.com/wiki/configuration/arducopter-parameter..."

"You can do one axis at a time or a combination of them:
http://copter.ardupilot.com/wiki/configuration/arducopter-parameter..."

"Yes I agree, I have SunnySky X4110S 400Kv motors on my Tarot X8 frame and they perform as expected, perfect!I bought them from GoodLuckBuy who sell the real deal no fakes."

"Yeah the Tarot flew, I have done 4 flights now, no Autotune yet, because of the high winds last weeks.Flies great in Loiter, good for me starting to learn how to fly a multirotor.Stabilize was very responsive, as this will be a photography/filming…"

"The wiki says below 100 should be OK but 0 would be better. It means the accelerometers are on their maximum.See the wiki for a better explanation: http://copter.ardupilot.com/wiki/ac_measuringvibration/But there is still some debate going on about…"

"The clipping is accumulative, so every time it clips it adds up."

"Ok so I figured the values out myself, I just used the values that where at SR1 these are the ones that where there and I just entered them for SR2:
SR2_EXT_STAT: 2
SR2_EXTRA1: 10
SR2_EXTRA2: 10
SR2_EXTRA3: 2
SR2_PARAMS: 10
SR2_POSITION: 3…"

"Can you tell me what settings you used, just to be sure for SR2 as I am also using TELEM2 as stated by Arducopter instructions.I didn't post mine as I was unsure if they where correct or not.The values for SR1 and SR3 where different I think with…"

"So somehow things are working but I am not sure if things remain stable."

"Hi I see the same issue, I just finished my Tarot X8 build last week with a Pixhawk and the minimOSD both from 3DR directly.I soldered the two pads to only use the power from the Pixhawk, the camera is powered from the TX.Everything works, though…"