Gender
Male
About
Location
Preveza 48100
Please tell us a bit about your UAV interest
survey mapping
Hometown:
Preveza
Activity Feed
"ppk is not possible?
with that not needed to online transfer data."
with that not needed to online transfer data."
"I have the same problem.
Did you power the rail to make it work?
I confused setting as relay the port that you connect the flytron and then set CAM_TRIGG_TYPE = 0 (servo).
What is your option in BRD_PWM_COUNT?
Must the pixhawk power by battery to…"
Did you power the rail to make it work?
I confused setting as relay the port that you connect the flytron and then set CAM_TRIGG_TYPE = 0 (servo).
What is your option in BRD_PWM_COUNT?
Must the pixhawk power by battery to…"
"In the X8R receiver i just connect the 3wire servo cable to a channel and in taranis i attach that channel in a 3 position switch. When the switch goes from center to up position the camera trigger. When it goes from the center to down position it…"
"from my X8R receiver i connect directly the three pins Ground , +5v, Signal.
The aux ports of pixhawk if i am correct does not supply power.
So must i use an external bec?
If so in pixhawk i must only connect the signal cable or i need Ground also?…"
The aux ports of pixhawk if i am correct does not supply power.
So must i use an external bec?
If so in pixhawk i must only connect the signal cable or i need Ground also?…"
Hello to the forum.I am a survey Engineer and new to pixhawk and to RC General.I already post the same question here:http://diydrones.com/profiles/blogs/remote-shutter-for-sony-nex-5n-... i don't…
"Steve can you help me.
I am a survey Engineer and new to pixhawk and to RC General.
I bought a second hand sony Nex 5R which already has wires connected to shutter. See the pictures. If i connect the white and the yellow cable the camera shot. …"
I am a survey Engineer and new to pixhawk and to RC General.
I bought a second hand sony Nex 5R which already has wires connected to shutter. See the pictures. If i connect the white and the yellow cable the camera shot. …"
