Gender
Male
About
Location
Ottawa
About Me:
Outdoorsman who developed a keenness for photography, RC and UAVs.
Please tell us a bit about your UAV interest
I hope to learn a great deal from this site and its members. Thanks for letting me join. I have the following arial vehicles. T-rex 450 250 Wasp RQ-11 RAVEN
Hometown:
Many places
Activity Feed
"There is no need for the Dummy WP now.http://diydrones.com/forum/topics/using-the-mission-planner-do-jump..."
"It turns out the Dummy WP is no longer needed after the DO_JUMP command. It was apparently a bug that has been squashed.I flew my plane today with no Dummy WP after the DO_JUMP command and the plane flew the loop continuously. I took off in Auto…"
"Great advice.
I'm having some trouble, whenever I set a dummy WP after my DO_JUMP command I get GPS Coordinates and an altitude. If I try to set my dummy WP to 0 in the GPS Coordinate, than I get a WP near Africa as this is 0 Lat 0 Long. I just…"
I'm having some trouble, whenever I set a dummy WP after my DO_JUMP command I get GPS Coordinates and an altitude. If I try to set my dummy WP to 0 in the GPS Coordinate, than I get a WP near Africa as this is 0 Lat 0 Long. I just…"
"Update,
I've noticed that when the aircraft is moving the compass heading is now same as the aircraft. But when stationary there is a slight drift. It was hard to spot before as I don't have a GCS guy most days and have to go into the logs after.…"
I've noticed that when the aircraft is moving the compass heading is now same as the aircraft. But when stationary there is a slight drift. It was hard to spot before as I don't have a GCS guy most days and have to go into the logs after.…"
Hi Guys.Mission Planner 1.3.37 build 1.1.5917.13431Firmware: (ArduPlane) Version 3.5.2Yesterday I setup an auto takeoff, to auto mission on my wing.Auto take off was set to a timer on my radio and it worked flawlessly! However as the plane reached…
"Will this work for new elevon mixing?"
"What is the way to do it in the new setup?"
"I'm trying to diagnose the possibility of a bad ESC in this 4 in 1.I'm presently using 3.3 firmware on the Pixhawk and there [THR_MAX] has been replaced with [MOT_THST_MAX]; and I also can't find 'MOT' in the log files. All I can find is 'MODE'…"
"I have one of these.And one of the motors occasionally doesn't spool-up with the rest of the motors. I've adjust the THR_MIN up in value and the MOT_SPIN value and updated the unit.I'm wondering if it has something to do with the ESC. Anyone know if…"
"Thank you so much.
I'm running 5008 340Kv motors swinging 17.5 inch carbon fiber slow fly props. 6 in total.
I did a full recalibration and auto tune in no wind.. It has helped and adjusted the PIDs. I would have thought the PIDs would have…"
I'm running 5008 340Kv motors swinging 17.5 inch carbon fiber slow fly props. 6 in total.
I did a full recalibration and auto tune in no wind.. It has helped and adjusted the PIDs. I would have thought the PIDs would have…"
"Yes,
I did a full recalibration and auto tune last night on hour before sunset when there was no wind.. It has helped and adjusted the PIDs. I would have thought the PIDs would have compensated for this, but I seem to be wrong on this assumption.…"
I did a full recalibration and auto tune last night on hour before sunset when there was no wind.. It has helped and adjusted the PIDs. I would have thought the PIDs would have compensated for this, but I seem to be wrong on this assumption.…"
Hi All,I've been having quite a difficult time with tuning my Tarot t960 with Pixhawk.I've had the system flying fairly well and doing missions, but I can't get the rapid oscillation out of the pitch access, roll is fine. The CG is set perfectly and…
"I'm having problems with Geo Fence.
When I'm in a mission the hex will often fence breach at the first waypoint and then RTL. Sometimes it will make it past the first waypoint to fence breach later in the mission.
I set the breach limit to 800m…"
When I'm in a mission the hex will often fence breach at the first waypoint and then RTL. Sometimes it will make it past the first waypoint to fence breach later in the mission.
I set the breach limit to 800m…"
"I'm having problems with Geo Fence.
When I'm in a mission the hex will often fence breach at the first waypoint and then RTL. Sometimes it will make it past the first waypoint to fence breach later in the mission.
I set the breach limit to 800m…"
When I'm in a mission the hex will often fence breach at the first waypoint and then RTL. Sometimes it will make it past the first waypoint to fence breach later in the mission.
I set the breach limit to 800m…"
