Gender
Male
About
Location
Bordeaux
Please tell us a bit about your UAV interest
Interrested by mav and particularly copters
Hometown:
Bordeaux
Activity Feed
""the telem logs provided is not exploitable" - What does that mean?
I think it's due to compassmot procedure, there's no magfield data available.
"Any other way I could get the magnified vs throttle graph?"
Yes. You have to flip each props and…"
I think it's due to compassmot procedure, there's no magfield data available.
"Any other way I could get the magnified vs throttle graph?"
Yes. You have to flip each props and…"
"Vibrations are ok, compass offsets and interference ok.
However, the telem logs provided is not exploitable. So the best thing to do now is to flight stabilize around one minute (with a gps 3D lock to ensure that it will be ok when you loitering)…"
However, the telem logs provided is not exploitable. So the best thing to do now is to flight stabilize around one minute (with a gps 3D lock to ensure that it will be ok when you loitering)…"
"I'm afraid that I don't understand completely your explications : MP will emit APM data ?
Is there any way to read basic data from a MD4-1000 with MP?"
Is there any way to read basic data from a MD4-1000 with MP?"
Hello,When I accidentally open a "hidden page" (CTRL+F), i discovered many cool features like swarming, follow mode, OSDvideo and amoung them a "Microdrone" button... If I click on it, mission planner ask me to select a com port & baud rate.I'm…
"Hello,
You can find the mag offsets "COMPASS_OFS_X", "COMPASS_OFS_Y" and "COMPASS_OFS_Z" in mission planner full parameter list. They should be between -150 and 150 and are all set by live calibration. Moreover, "compassmot" interference must be…"
You can find the mag offsets "COMPASS_OFS_X", "COMPASS_OFS_Y" and "COMPASS_OFS_Z" in mission planner full parameter list. They should be between -150 and 150 and are all set by live calibration. Moreover, "compassmot" interference must be…"
"Hello,
GPS Ncount and HDOP are ok, vibration level seems to be ok but X and Y axis are borderline. Have you check your mag (good offsets) and set up compassmot and obtain interference below 30 % ?
Could you provide a telemetry log of a hover flight ?"
GPS Ncount and HDOP are ok, vibration level seems to be ok but X and Y axis are borderline. Have you check your mag (good offsets) and set up compassmot and obtain interference below 30 % ?
Could you provide a telemetry log of a hover flight ?"
