Please tell us a bit about your UAV interest
Multirotors
About
Activity Feed
"Hi Jacob
Your main cause of the problem is that you have the larger props on the top (12.5) and the (11.47) on the bottom.
if you change the larger props to the bottom layer you will certainly see a positive behavior change.
In your case, since you…"
Your main cause of the problem is that you have the larger props on the top (12.5) and the (11.47) on the bottom.
if you change the larger props to the bottom layer you will certainly see a positive behavior change.
In your case, since you…"
"Hi Rob
I know you are very busy with the CF parts.
But could you PLEASE send me the aluminum parts in whatever condition next week ?
I would really like to have them here before the end of the year .
Everything else is already sitting here,…"
I know you are very busy with the CF parts.
But could you PLEASE send me the aluminum parts in whatever condition next week ?
I would really like to have them here before the end of the year .
Everything else is already sitting here,…"
"Hi Rob
Can you please tell me when the Aluminium parts will be mailed ?"
Can you please tell me when the Aluminium parts will be mailed ?"
"Rob, the top plate being a slightly heavier should not be a big problem for me.
Anodized would be great, as it would stiffen the frame even more, if I remember correctly, very light burrs actually disappear in the process. But the big nasty once…"
Anodized would be great, as it would stiffen the frame even more, if I remember correctly, very light burrs actually disappear in the process. But the big nasty once…"
"Robert, I am actually using the 180A Attopilot with my APM2 on my Hex, due to a miscalculation on my behalf (regarding prop size) I had an unplanned landing, analysing the log showed a huge voltage drop and increase in current . It actually hit the…"
"I also would like to see a power module with 300 Amps !Could probably be achived by supplying diverent value shunt resistors, and we can put them in ourselves.And have the values in the mission planner for setup.
Will the existing power module burn…"
Will the existing power module burn…"
