"Hi Kevin,
Sorry for the late response.
I have on my Samsung tablet a firmware update turned to 4.0.4.
Now he sees the XBee.
Now you may experience the following problem: There is a high power USB device connected.Could not working.
"I have Andropilot 0.1.14 installed on my Samsung Galaxy Tab 10.1 the program works.
Unfortunately, there is no communication to do with my Arducopter via Xbee.
There are problems with the USB. Who can help me.
"In response to the problem I have done some further research. I noted the following: Mavlink the communication between the USB and APMboard APMplanner is not built I watched this with the program Portmon Seems that the firmware gives a wrong answer…"
"Michael,
In response to the problem I have done some further research. I noted the following: Mavlink the communication between the USB and APMboard APMplanner is not built I watched this with the program Portmon Seems that the firmware gives a…"
"Michael, I request you to disconnect the GPS receiver but to no avail. The following is true: 2 weeks ago I bought the print. I then downloaded the 1.0.9 APMplanner and firmware Hexacopter set. it worked then. Yesterday I did an update to 1.0.19…"
"Michael,
I have loaded your APMplanner 1.0.19.
The terminal with the CLI switch to the left site working.
Firmware can I updaten.
When the CLI switch swithed to the right and I wil connecten for the Flight Data then stopped the connecting by 24…"