Gender
Male
About
Please tell us a bit about your UAV interest
Hexacopter
Activity Feed
"Hi Bret,
I believe I did configure the max and min frequencies using the AT command procedure described on this page:
http://copter.ardupilot.com/wiki/common-using-the-3dr-radio-for-tel...
There is a GUI in mission planner you can use to…"
I believe I did configure the max and min frequencies using the AT command procedure described on this page:
http://copter.ardupilot.com/wiki/common-using-the-3dr-radio-for-tel...
There is a GUI in mission planner you can use to…"
"I have the D8R-II Plus flashed with new firmware outputting cppm. If you want a nice small light reciever the 4 channel ones are the way to go. With the cppm firmware they output 8 channels. …"
"@LTMNO
As Richard indicated it is this telemetry set here:
http://store.3drobotics.com/products/3dr-radio-telemetry-kit-433-mhz
I'm not sure if there's an equivalent in 915mhz. I'm sure if you hunt around you'd find something. I bought a separate…"
As Richard indicated it is this telemetry set here:
http://store.3drobotics.com/products/3dr-radio-telemetry-kit-433-mhz
I'm not sure if there's an equivalent in 915mhz. I'm sure if you hunt around you'd find something. I bought a separate…"
"Here's some photos showing my 9x with the 3dr radio to bluetooth bridge integrated inside. This has the same functionality of the box proposed by Jeff without the need to carry arond another box/battery. There's a bunch of other mods in here but you…"
"This a good idea and I probably would have purchsed previously. I have added a 3dr Radio and bluetooth module to my 9x transmitter. Saves having to carry round another box/battery. The telemetry powers on when I switch on the transmitter. "
"I'd definitely be interested in one of these!"
"I have the same thing on my HK 5.8 400mW Tx. Mine occured when I briefly connected two pins with a multimeter probe. My video still works however I get the rolling pattern overlaying the video. I am not convinced this is a resistor as I noted there…"
"There is a working android gcs available here:
http://autoquad.org/wiki/wiki/getting-started/autoquad-software-set...
This is based on the copter-gcs linked by others. Last updated in November 2012.
You will need a Bluetooth module like this:…"
http://autoquad.org/wiki/wiki/getting-started/autoquad-software-set...
This is based on the copter-gcs linked by others. Last updated in November 2012.
You will need a Bluetooth module like this:…"
