About

Gender

Male


Please tell us a bit about your UAV interest

Just getting in to fixed wing flight controllers, hope to build a VTOL later.


Hometown:

Mol


Activity Feed

Jan Jansen replied to Nadav Assor's discussion Sending messages from another program into MAVProxy
"I have the opposite need, but I guess its actually the same problem. I want to get data out of mavproxy. In particular, I want GPS and sensor data. Im using a raspberry pi thats connected to the pixhawk, and I want to geotag the images Im making…"
Oct 3, 2015
Jan Jansen posted a discussion
Im trying to get by using a servo gimbal to stabilize my raspberry camera, but because the servo has limited resolution, the constant tiny but very fast movement is introducing jello in my photo's. Here is an example:It goes away if I disable the…
Sep 28, 2015
Jan Jansen replied to Raph's discussion Pixhawk & Analog Airspeed sensor
"as it turns out, my pito tube became clogged with some foam from the cover I made for it. Its better now, still not very accurate at low speeds, but at least usable."
Sep 25, 2015
Jan Jansen posted a discussion
Hi all,Im flying a raspberry Pi thats connected to a pixhawk. The raspberry is mostly used as camera , it has one (and soon several CSI) camera module('s) attached to it. Right now triggering is done by reading a GPIO port thats connected to a…
Sep 24, 2015
Jan Jansen replied to Raph's discussion Pixhawk & Analog Airspeed sensor
"its just like you said.  Although I found the analogue sensor to be nearly useless."
Aug 27, 2015
Jan Jansen posted a discussion
I spent several days on this and its driving me up the walls.I use arduplane 3.3.0. I have two pixhawk (clones, fixhawk and HKpilot32 with external neo 7m gps/compass). The problem is the same with both.  I need to mount the pixhawk at a 270 degree…
Aug 17, 2015
Jan Jansen posted a discussion
Hi all,Am I right in saying that when you have a pixhawk with internal compass and an external gps/compass, that the external will be compass 1, and the internal compass will become 2 ?If so, am I right thinking that if the i2c cable of the external…
Aug 15, 2015