Hello guys, I have been working on my Ardupilot project now for over three months, and have run into many obstacles along the way. A lot of my problems were simply due to inexperience and were solved by help from many of you here on the…

Hi guys, I have been working on an Arudpilot project for quite some time now. After a lot of testing, and the odd crash landing into the snow and elements, I thought it would be a good idea to get some new hardware. I believe the original hardware…

Hey guys, With a lot of help from Chris I was able to get Ardupilot 2.5.4 loaded onto my board today. Once loaded, I came accross my next 2 issues. Issue 1:The flight modes.  I wanted to test if changing the all the  flight mode descriptions in the…

Hey Everyone, I have been on a bit of a standstill with my Ardupilot project lately, but managed to get out for a test flight, and as usual have returned with more Ardupilot questions. I have the Ardupilot 2.4 in an Easystay with the following…

Hey Everyone, Our goal is to eventually get Ardupilot 2.4 up and running in our Easystar... here is our equipment: Ardupilot Arduino ATMega328 Board (red board)Shield V2 kit (blue board)EM-406A USGlobalSat GPSSpektrum Dx6i transmitter, Spektrum…

Hey guys, I am just wondering if it matters when the gps is unplugged when putting the ardupilot into fly-by-wire mode? Should i power the ardupilot up with gps plugged in and then disconnect or should I power it on with no gps attached? If it makes…

I am hoping someone may be able to help me figure out some issues with an Ardupilot Ptoject! First off, here is a list of my equipment: Easystar GliderArdupilot Arduino ATMega328 Board (red board)Shield V2 kit (blue board)EM-406A USGlobalSat…