Hello guys,
I have been working on my Ardupilot project now for over three months, and have run into many obstacles along the way. A lot of my problems were simply due to inexperience and were solved by help from many of you here on the forum.
Howeve
Read more…Hi guys,
I have been working on an Arudpilot project for quite some time now. After a lot of testing, and the odd crash landing into the snow and elements, I thought it would be a good idea to get some new hardware. I believe the original hardware is
Read more…Hey guys,
With a lot of help from Chris I was able to get Ardupilot 2.5.4 loaded onto my board today.
Once loaded, I came accross my next 2 issues.
Issue 1:
The flight modes. I wanted to test if changing the all the flight mode descriptions in the h
Read more…Hey Everyone,
I have been on a bit of a standstill with my Ardupilot project lately, but managed to get out for a test flight, and as usual have returned with more Ardupilot questions. I have the Ardupilot 2.4 in an Easystay with the following hardwa
Read more…Hey Everyone,
Our goal is to eventually get Ardupilot 2.4 up and running in our Easystar... here is our equipment:
Ardupilot Arduino ATMega328 Board (red board)
Shield V2 kit (blue board)
EM-406A USGlobalSat GPS
Spektrum Dx6i transmitter, Spektrum AR611
Read more…Hey guys,
I am just wondering if it matters when the gps is unplugged when putting the ardupilot into fly-by-wire mode? Should i power the ardupilot up with gps plugged in and then disconnect or should I power it on with no gps attached?
If it makes
Read more…I am hoping someone may be able to help me figure out some issues with an Ardupilot Ptoject!
First off, here is a list of my equipment:
Easystar Glider
Ardupilot Arduino ATMega328 Board (red board)
Shield V2 kit (blue board)
EM-406A USGlobalSat GPS
Spekt
Read more…