Gender
Male
About
Location
Cape Town
Please tell us a bit about your UAV interest
Pixhawk
Hometown:
Cape Town
Activity Feed
"Thanks for your reply.
I use only bottom plate of the mount posted above - another set of holes for dampers are in the carbon frame's plate itself. They are about 45x45mm. It's definitely not a pixhawk size, although it used to work on AC 3.2. Could…"
I use only bottom plate of the mount posted above - another set of holes for dampers are in the carbon frame's plate itself. They are about 45x45mm. It's definitely not a pixhawk size, although it used to work on AC 3.2. Could…"
"On the mount like that:Not sure whether it's too soft. What do you think?"
"Thank you for your help, I'll try to apply the strategy that you proposed.
Just a quick question. What did you mean by the following?
Check to make sure your copter is stable when quickly rolled and pitched to 45 degrees and the stick is let go.…"
Just a quick question. What did you mean by the following?
Check to make sure your copter is stable when quickly rolled and pitched to 45 degrees and the stick is let go.…"
"Logs: http://1drv.ms/1MPxlJ5
First file - P value tuning. Second one - more about I value tuning.
Photo: http://1drv.ms/1PuM8I2
The only difference is that GPS is put on stick now (the same location, but on stick)."
First file - P value tuning. Second one - more about I value tuning.
Photo: http://1drv.ms/1PuM8I2
The only difference is that GPS is put on stick now (the same location, but on stick)."
"Upgrading AC from 3.2.1 to 3.3 caused PIDs confusion.
I've never changed PID values for my PixHawk based quadcopter before. I always used the default values, and it flew perfectly. But one day after upgrading the firmware to AC3.3 (I did all…"
I've never changed PID values for my PixHawk based quadcopter before. I always used the default values, and it flew perfectly. But one day after upgrading the firmware to AC3.3 (I did all…"
"@Franc, would you mind to share assets of the design? I'm working on ground station for Win8/10 tablets at the moment. It would be great if you allow me to use the presented design for it."
