Gender
Male
About
Location
Atlanta, GA
About Me:
I am from Atlanta Georgia. I just bought a 3d Robotics multi copter. My objective is to start producing arial photography. Update! I killed the 3d Robotics Y6. I have moved on to a Turbo Ace Quad controled by a Pixhaw. The little 6 bladed baster tried to cut me.
Please tell us a bit about your UAV interest
Vertical Photography, DTM's, light weight gimbals, chdk cameras, autonomus flight, y6's, and just any thing cool.
Hometown:
Atlanta
Activity Feed
"AWESOME! Thanks for sharing that.
Josh "
Josh "
"I thought I would share my experience with Agisoft. Here is what Agisoft looks like when you are classifying the dense point cloud. The software takes all the points generated from the dense point cloud and breaks them into cell size which the user…"
"Huh. I will look into that. Thanks"
"I am just getting into point cloud classification. I am using Agisoft. They have a built in GUI for doing this. It is done by taking the lowest point elevation in a user defined cell and applying a masking angle to that along with a max height. I…"
"I am running a very similar set up. Turbo Ace Matrix-S with their gimbal, 6s, 12 volt voltage regulator, the BaseCam 8 bit flight controler, a Sony A7, and the Pixhawk Flight Controler. It took me months to get this it all working. I am using…"
"I will post it on Tuesday. I am out of the office and those notes and other pictures are on my office computer.
Josh"
Josh"
"Here is a site we surveyed. I think there were 14 pictures used to create this mosaic. The camera was a Canon point and shoot. We had tilt problems with some of the photos.
https://drive.google.com/file/d/0B4uF4seAz8QNUDlsYUh1V2JpVm8/view?u...
Josh "
https://drive.google.com/file/d/0B4uF4seAz8QNUDlsYUh1V2JpVm8/view?u...
Josh "
"I don't post very much but I have been down the road that you are going down and I thought that I would contribute what I did. First off I was using a Y6 with a Canon camera and right off the bat I had a weight limit of 600G to work with. If you buy…"
"I sure would like to see a picture of your setup with the Sony Nex and the juiced motors. I am think of doing the same thing.
Josh "
Josh "
"OK let’s get something out of the way. I am completely new to UAVs and it is a miracle from God that I have got my Y6 as far as I have.
Last month I was trying to survey an 8 acre farm and did a flight plan that encompassed the site. I like to use…"
Last month I was trying to survey an 8 acre farm and did a flight plan that encompassed the site. I like to use…"
"I have not been able to load more than 49 waypoints. I am running the Pixhawk. "
"We have been using marking paint on grass surfaces. Yes, it is a little destructive but it goes away within a week or two and we can see it easily in the photos. They make plastic sheeting just for this application, but I have never used it. Here is…"
"I am in the same boat with you. I have a y6 and I am trying to mount a Canon Elph to it. I have been working on getting the CHDK working along with the voltage step up to trigger the shutter and I am just about there. I have some pretty small weight…"
