Gender
Male
About
About Me:
FPV fan
Please tell us a bit about your UAV interest
FPV fan
Hometown:
Chelyabinsk
Activity Feed
"I wonder if the antenna works upside down. Have you got any test result?"
"Sure it could be a hardware fault. But I'm sure it would be clearly visible in the log.
I have uploaded a non-flying dataflash and telemetry logs on Google Drive."
I have uploaded a non-flying dataflash and telemetry logs on Google Drive."
"Austin, thanks for your analysis!Yes throttle was cut-off at the moment of flip by a fixed-wing habit :(But it was restored instantly. Receiver FS (not APM) was set to center sticks and LAND.I don't think it could be a gyro problem. At least the log…"
"Dear Austin,
Take a look at the link provided above. There are lot of info to look at, including logs and a 10 min video of the flight and the crash.
Thanks."
Take a look at the link provided above. There are lot of info to look at, including logs and a 10 min video of the flight and the crash.
Thanks."
"Nothing is wrong with recent updates.
If nothing is wrong could you please take a look into logs and tell me why ArduCopter did its best to perfectly stabilize INVERTED flight? It did it fine but something is definetely not right. "
If nothing is wrong could you please take a look into logs and tell me why ArduCopter did its best to perfectly stabilize INVERTED flight? It did it fine but something is definetely not right. "
"Just my 2¢: http://diydrones.com/forum/topics/y6-crashed-in-stab
Something is definetely wrong with recent updates."
Something is definetely wrong with recent updates."
Hi everyone,Hexacopter Y6 has crashed from altitude of 100m, being in STAB mode.Setup: HKPilot 2.5, ArduCopter 3.1.3 Homemade frame Y6 SunnySky X2212 980kv Plush 18A with blheli Props 10x4.5Video and logs: on GoogleDriveLook at the end of the video…
