About

Gender

Male


Location

Anchorage, AK


About Me:

I live in Alaska. I own a Heli-Max 230Si, DJI Phantom 1, and a 3D Robotics Iris+.


Please tell us a bit about your UAV interest

Surveying, flying with my son, Search and Rescue


Hometown:

Anchorage


Activity Feed

Master Decker replied to Master Decker's discussion New Iris+, won't arm or anything but yell at me.
"It's been nearly a year since my initial post.  I've now got well over 300 flights on my Iris+, and still love it.  Recently I left my bird at the high shop to get some work done.  They inspected my motors, esc's and installed the minum osd, as well…"
Dec 3, 2015
Master Decker replied to Master Decker's discussion New Iris+, won't arm or anything but yell at me.
"I'm sorry I keep forgetting to reply.  I've recalibrated the IMU, compass and esc's.  I was able to reinstall the firmware, and have been flying ever since.  Lesson learned, when using mission planner, turn the volume up so that you can hear what…"
Jul 23, 2015
Master Decker replied to Master Decker's discussion New Iris+, won't arm or anything but yell at me.
"Yep that was me.  I've done the calibration over and over again.  So just flashing yellow light, won't arm the rotors, screams the alarm.  The safety button flashes 4 times then a pause and repeats.  I also cannot calibrate the accelerometer.  It…"
Dec 28, 2014
Master Decker replied to Master Decker's discussion New Iris+, won't arm or anything but yell at me.
"Yes, I ensured throttle was all the way down, switches and even the dials at proper preflight settings.  I'm fairly sure that I mucked something up in settings.  If I plug back into the computer, and select iris params, will that restore the iris+…"
Dec 28, 2014
Master Decker replied to Master Decker's discussion New Iris+, won't arm or anything but yell at me.
"I've done that, several times.  It says success but still does the same thing.  I'm not sure what I goofed up.  I'm not familiar enough with APM to know what I'm doing.  I wish I could reset to factory defaults.  The only thing I saw was for the…"
Dec 27, 2014
Master Decker posted a discussion
I won a 3D Robotics Iris+, I did a brief 5 minute flight, coming from flying Phantoms, I wanted to get familiar with the controls.After that, I plugged into my wife's computer to set up a mission.  I also looked around at some of the settings.  Now…
Dec 27, 2014