It should be possible to fairly easy create a device receiving signals from both RX and APM to forward the APM signal as long it is there and fallback to the RX signal. A cheap AVR powered from the RX should do the trick."
Hi,Can anyone give me some pointers on how to build an electric FPV platform with an endurance in the 30-40min range?The payload should be in the 250-400g range, when the FPV is installed.I've been looking at the following…
Hi,Is there an easy and cheap way to get an audio variometer on a glider?Just like in full-size gliders.I've only found some systems in the $300-$400 price range. I'm looking in the $50-$100's :)Best regardsMichael
Hi guys,I'm really sorry if this subject has been asked before but I cannot find the answer.There goes.If I connect my cheap china cam (PAL) to the MinimOSD (v.1.1) everything is fine, the signal is overlayed by the data, but if I do the same with…
I've just gotten my APM2 with onboard GPS. I just mounted it in my Bixler and haven't got any problems. I think is is more important with the external GPS if you're flying a big plane with a lot of metal in it (shields the antenna on the…"
Hi guys, I just got my AttoPilot Voltage and Current sensor (50V 90A) and soldered two XT60 connectors and some wiring on it. However the output from the voltage lead is a but high. I've got my battery (Lipo 3S, 12.60V) connected but the following…