About

Gender

Male


Location

Raleigh, NC


About Me:

Now full time with Aerobot Services. www.aerobotservices.com Previous: 45 years in computer systems design and development.


Please tell us a bit about your UAV interest

Developing a full suite of services deploying several multicopter special purpose frames along with motorized gliders for large terrain videography, and image mapping. We have selected 3DR Robotic's to supply our flight control systems along with mission planning.


Hometown:

Raleigh, NC


Activity Feed

Mike Governale replied to 0btupvr1reiob's discussion FAA Exemptions for 3DR platforms
"Thanks Clayton...
From your recommendation and after looking into the specs of the camera, we just ordered a Canon S100 for testing of mid altitude normal image survey mapping with our Skywalker planes.
Questions:
1.  Do you use any form of gimal to…"
Jun 3, 2015
Mike Governale replied to 0btupvr1reiob's discussion FAA Exemptions for 3DR platforms
"Sorry, the link to the NDVI was incorrect...
Here is the correct link to the original post on the forum...
http://diydrones.com/profiles/blogs/ndvi-wheat-crop-surveys-behind-...

Mike"
Jun 1, 2015
Mike Governale replied to 0btupvr1reiob's discussion FAA Exemptions for 3DR platforms
"Hi Clayton.
Congratulations on your FAA exemption.
In response to your desire to connect with others, we are also using the 3DR products in both our aerial "Videography" and "Surveys" line of drone services.  We have been hard at it for the last…"
Jun 1, 2015
Mike Governale left a comment for Eric Coronel
"Thanks Eric for the quick reply on how to implement your suggestion.

Mike G."
Apr 19, 2015
Mike Governale left a comment for Eric Coronel
"Thanks Eric for viewing our post and your suggestion.
We are always looking for improvements.
Does your recommendation mean that our Y6's would be flying backwards on every other row of survey mission?
Also, what command and/or parameters would we…"
Apr 19, 2015
Mike Governale left a comment for Henrique Ferreira Lima
"Thanks Henrique,
We carry a modified Canon PowerShot A810 (with standard lens) for the NDVI imagery.  We fly the same mission with another "unmodified" A810 to capture the 16 mp images.
At some point, we hope to be able to afford using (and risking,…"
Apr 17, 2015
Mike Governale left a comment for Alexey Dobrovolskiy
"Thanks Alexey...  and good luck with your latvian farmers.
We carry a modified Canon PowerShot A810 (with standard lens) for the NDVI imagery.  We fly the same mission with another "unmodified" A810 to capture the 16 mp images.
We use Kolor's…"
Apr 17, 2015
Mike Governale left a comment for RPM
"Thanks Mayehem.
For the NDVI imagery, we use a Canon Powershot A810 with its sensor modified for Infrared with and a front RED lens filter.  The captured infragram images are then processed to produce the NDVI images.  We fly the same mission again…"
Apr 17, 2015
Mike Governale posted a blog post
The video above attempts to provide a "Behind the Scenes" view of how we are capturing the NDVI composite images while working with a local farmer and a section of his wheat crop.The on board video, captured images, along with ground video and…
Apr 16, 2015
Mike Governale commented on Quadzimodo's blog post Trent@MyGeekShow USA Trip Conclusion
"Trent,
I am totally confident that you will master your technical difficulties in the air, but what I am most impressed with is how you have navigated around the social trash on the ground... 
Mike"
Jun 27, 2014
Mike Governale replied to Daniel Perez's discussion RTL AND CRASH AC3.1.2
"Daniel,
I'm not an expert log reader like they other great developer guys, but I have had a lot of crashes over the last couple of years, and am starting to use the logs more and more for crash forensics.
In any case, I have taken a look at your…"
Feb 21, 2014
Mike Governale replied to Mike Governale's discussion FailSafe Disarm & Crash 400ft up... NOT GOOD, but could have been worse.. in ArduCopter User Group
"Thanks Julian for your reply.
I'm somewhat confused.
You are right, my DragonLink's are hight quality.
If I just program the DragonLink receiver (at TX failure) to go to stick settings that will have the throttle raised to either still hover (and…"
Feb 17, 2014
Mike Governale replied to Mike Governale's discussion FailSafe Disarm & Crash 400ft up... NOT GOOD, but could have been worse.. in ArduCopter User Group
"Thanks Choppy.

I know its a twisted feeling, but it sure felt good to hear that you still have nightmares of a similar crash.
I was so glad you documented a low voltage down to 3.2 volts from the APM supply.  This is most certainly what caused my…"
Feb 16, 2014
Mike Governale replied to Mike Governale's discussion FailSafe Disarm & Crash 400ft up... NOT GOOD, but could have been worse.. in ArduCopter User Group
"Thanks Jonathan,
for nailing an exact explanation to how APM's Failsafe and the PPM Encoder logic worked together to produce a DISARM while I for 400 plus feet high.

I will be starting the bench test everything on the rebuild with the dual power…"
Feb 16, 2014
Mike Governale replied to Mike Governale's discussion FailSafe Disarm & Crash 400ft up... NOT GOOD, but could have been worse.. in ArduCopter User Group
"Thanks Henri,

My APM 2.5 is in a case.  I've previously checked the foam and added black electrical tape on the top of the case to avoid sun rays.

In my rebuild, I'm adding a separate 3s 12volt Lipo for the FPV along with a separate 6 volt UBEC…"
Feb 15, 2014
Mike Governale replied to Mike Governale's discussion FailSafe Disarm & Crash 400ft up... NOT GOOD, but could have been worse.. in ArduCopter User Group
"Jonathan,

I've attached the video of the crash that was captured in the HUD view of Mission Planner.  I loaded it to YouTube and the link follows.
OSD/HUD Video of Crash (Low Res)

Thanks for the observations you have submitted from viewing the…"
Feb 15, 2014
More…