About Me:

Background in surveying and geomatics.

Please tell us a bit about your UAV interest

Mapping, 3D models, photogrammetry, surveys


Edmonton, AB

Activity Feed

RPM commented on Chris Anderson's blog post New Draco development platform for Dronecode/PX4 with Realsense sensors
"20m/s wind tolerance is insane!"
May 26, 2019
RPM commented on TenzinR's blog post Human Flying Drone
"So we are going with real on this one? Just looks so fake, I thought he would swing more when being lifted off the ground. Wish it would carry this guys off so we wouldn't have to see him again ;)"
Dec 21, 2016
RPM commented on Dmitriy Ershov's blog post Event 38 starts Reach RTK equipped mapping drones delivery
"Nice work guys thanks for posting the results. It would be cool to see some published coordinates observed with both to compare. Something I will be doing myself real soon. Cheers!"
Dec 1, 2016
RPM commented on Greg Dronsky's blog post Vertigo V.2 - affordable drone zoom gimbal
"Looks like a great product! Question about the statement;
"Vertigo V2 is made from highend ABS-PETT material. It enables it to work for more than 6hours or more nonstop!"
Is this the limit of how long you tested it? When it stopped working?…"
Nov 17, 2016
RPM commented on Tersus GNSS's blog post Pre-order for Precis-BX316
"Is anyone using Tersus products in the field yet? Always very interested in learning more."
Nov 7, 2016
RPM commented on Chris Anderson's blog post New 3DR autopilot: Pixhawk Mini
"Oh no, another 'Expected ship date'."
Oct 28, 2016
RPM commented on Andy Osusky's blog post Autonomous Boat to Cross the Atlantic Ocean
"Cool project, unfortunate that it turned into sea trash. Where was your intended destination? Remnants of hurricane Matthew came through and hit the island pretty hard around the same time it went dark it seems."
Oct 27, 2016
RPM commented on DROTEK's blog post TinyRTK Drone Edition - Fully integrated RTK module with u-blox NEO-M8P
"Your details say up to 8hz refresh rate. What is the refresh rate for optimal performance? And how does this match up with say a regular M8N pixhawk set-up with 10hz refresh rate? Would it be providing a more accurate signal but at a slower rate? I…"
Sep 20, 2016
RPM commented on Dmitriy Ershov's blog post Adorable mini-bike drives itself with the aid of a Raspberry Pi+NAVIO2
"It is cool but as a motorcycle rider I think it is the worst! Keeping a motorcycle balanced is part of the whole idea, feel and thrill of riding!"
Sep 16, 2016
RPM commented on DROTEK's blog post TINY RTK : The world smallest precision GPS ... and the cheapest
"Thanks @Brian but I am talking specifically about the uBlox NEO-M8P-2-10."
Sep 12, 2016
RPM commented on DROTEK's blog post TINY RTK : The world smallest precision GPS ... and the cheapest
"This is awesome, congrats on being the first (that I know of) to get it in usable form. I assume ublox has their own processing algorithm? What are the advantages over similar boards using RTKlib? Other than weight.
Sep 12, 2016
RPM commented on Andrew Tridgell's blog post APM:Plane 3.7.0 released
"Thanks again for another great update! Putting us small guys on track to become corporate ArdruPilot investors sooner rather than later!"
Sep 9, 2016
RPM commented on Chris Anderson's blog post 3DR Site Scan now comes integrated with amazing Sony R10C
"Too bad. The lack of any comments at all on how there may be a non site scan subscribed option is disappointing.
At a cost of 20k to run site scan for 2 years with 1 drone I would definitely go the route of 2x competitors drones (that can cover 2x…"
Sep 7, 2016
RPM commented on Joe Renteria's blog post "Wing Board" using Pixhawk and GCS...
"All that which BacklashRC said considered I think you could still get Red Bull to try it once!"
Jul 22, 2016
RPM commented on Ivan Stamatovski's blog post Complete mapping solution with Sony QX1 by Easy Aerial
"Looks great! When will this setup be available in the store??"
Jul 20, 2016
RPM commented on Kyle's blog post NextGen Quiet High Endurance Heavy Lift MultiRotor
"2 CF Tees are for inverted landings? ;)"
Jul 13, 2016