"I think I might have located the source of the fluctuations. I landed yesterday and went to take the battery out and the positive wire pulled right off the plug, the only thing that was holding it to the plug was heat shrink wrap. The solder joint…"

"Rejean, thanks so much for your reply. I've noticed the huge fluctuations in voltage on Mission Planner. I'm not sure if the sensor is too sensitive or if there is a problem somewhere. I'm using a brand new 3DR power module. I did go through the…"

"Thanks for the advice, I believe I have found my setup issue. I also see that that location was particularly horrible for flying via GPS. My normal flying zone currently is showing me 11 sats with a HDOP of 1.5.  I'm going to give it a go on Friday…"

"Thanks for pointing me in the right direction on this. I'll begin some due diligence on this topic. Do you have any idea why when it is landing itself, it won't let me retake control. I tried switching it back to stabilize to regain control and get…"

"Wow. I'm not sure how to grab an AP log. Obviously I need to do some more due diligence in this reporting/log area. Rather than waste your all's time with those questions, I'll dig in online and get my terminology and processes straight and then ask…"

"Thanks! I've passed your message on to my buddy. "

"added. thanks!"

"Here is the tlog. Thanks!2015-12-20 13-50-00.tlog"

"I saw a tutorial on vibrations and hadn't gotten that far. All other calibrations were fine so I guess I got a little ahead of the game. Luckily only a $20 mistake. More costly in lost flight time.  I also had a fishbowling issue earlier in the day…"

"Forgive my ignorance but should I post RLOG or Telemetry LOG?  "

"I did have a warning under device manager. Updating the driver said I had the most recent available.  I actually went flying this morning without a GS, just flying for fun and came back and tackled the issue. I started getting the issue on my APM as…"