Mike Sousa's Discussions

mavic pro zoom record video around route stop and turn and control zoom level

Hi

Is there a way to have the drone continue to record video (it stops right now) as it goes through a stop and turn?

How is the zoom value controlled with UgCS for a Mavic Pro Zoom?

Thanks...

Started by Mike Sousa

DJI Zenmuse Z30 Zoom

Hi

The Zoom control doesn't seem to make the camera zoom in or out. We've had to manually set it before a route. Is there something I'm missing? Is the Z30 a supported camera? If not, is there a list of supported cameras? If so, what are expected valu

Started by Mike Sousa

Set waypoint as landing spot

Hi

I've been able to set one of the waypoints as the 'start point', will that make the return to home point also? If not, how do I make the start point the return point? The route became numbered in a way that the 1st waypoint is in the middle of the

Started by Mike Sousa

Adding waypoints to existing route?

Hi

How does one add a waypoint to an existing route?

Also, is there a way to change the numbering of the route's waypoints?

Thanks...

Started by Mike Sousa

route param changes in flight

Hi

Is it possible to make changes to the route parameters while the route is active (quad in flight)?

Thanks...

Started by Mike Sousa

telemetry window, change lat/long to decimal?

Hi

When the mission is in progress, in the Telemetry window, is it possible to show Lat/Long as decimal instead of d,m,s?

Thanks...

Started by Mike Sousa

overlaps vs set camera by time

Hi

In the facade setup menu on the mission editor you select Forward/Side overlap, you can also set the camera action by time and mode. Can these conflict , if so, which one overrides the other?

Thanks...

Started by Mike Sousa

beta version: instantly mark a location the map?

Hi

In the new beta version it mentions the following:

"An option is added to instantly mark a location the map for detailed inspection, e.g. when something identified in the video during the flight."

Can this info for marking the map come from the video

Started by Mike Sousa

taking photos between waypoints in facade scan

Hi

Is there a way to show on the facade scan route where the images would be taken? Say I have a facade scan where the ground waypoints are 40m apart and I want to take an image every one meter along the route.Is it possible to display on the route in

Started by Mike Sousa

Orientation of quad after Hold

Hi

During some flights (facade routes), with both a Mavic 2 Zoom and a Matrice 210 RTK, pressing 'Hold' followed by doing some manual flying was done. When Continue was pressed, the quad went back to the original route but did not resume the proper or

Started by Mike Sousa

Exporting section of route from Telemetry

Hi

I've collected telemetry for a fairly long flight and because of this, it has too many waypoints and will not process (I'm suspecting that's the reason why). Is it possible to save a part of the telemetry as a KML file in the Telemetry player, or m

Started by Mike Sousa

View images while replaying telemetry

Hi

Is it possible to view the images taken during a mission while viewing the telemetry for that mission? The images have been geotagged.

Thanks...

Started by Mike Sousa

Facade Scan, Side/Forward Overlap

Hi

In setting up a Horizontal Facade Scan (long tracks left to right, with short steps up), which direction is considered Forward overlap?

Thanks...

Started by Mike Sousa

Capturing video/images from DJI Mavic/Matrice

Hi

I've flown a route with both a Mavic 2 Zoom and a Matrice 210 RTK and there wasn't any video or images captured. I think I'm missing something, I had the set camera by time, and then by mode (with start recording selected).

Please advise, thanks...

Started by Mike Sousa

Battery change mid flight in route with UgCS for DJI

Hi

I've watched this Battery Change video:

https://www.youtube.com/watch?v=0w7GSJzU_Qw

and was wondering if this could be done mid route in a Facade scan?

Thanks...

Started by Mike Sousa

Showing video in Telemetry Player from a DJI Mavic 2 Zoom

Hi

I'm recording video (.mp4) from a DJI Mavic 2 Zoom and was wondering if it's possible to view that video while replaying a route in the Telemetry Player? I can geotag images from a route but doesn't allow me to select any video for a particular rou

Started by Mike Sousa

UgCS for DJI, After "Set Home Location", have route automatically go to Home location

Hi

When using the UgCS for DJI App, if the "Set Home Location" button is selected, is it possible to have the uploaded route automatically return to that Home location at the end of the route?

Thanks...

Started by Mike Sousa

Capturing telemetry data along with video

Hi

How do I go about capturing telemetry data with the video, and play it all back together? I am flying a Mavic 2 Zoom and have UgCS for DJI installed.

Thanks...

Started by Mike Sousa

Viewing Mavic 2 Zoom Vision Sensors?

Hi

Is it possible to view the output of the Forward/Downward Vision Sensors on the Mavic 2 using UgCS for DJI?

Thanks...

Started by Mike Sousa

UgCS for DJI setup

Hi

I've been able to get a number of routes to execute but still have some questions about some of UgCS for DJi's functionality:

Can I get the video recording to start at a specific waypoint? I usually start it with the 'Set Camera Mode' section of the

Started by Mike Sousa