Gender
Male
About
Location
Southern New Hampshire
About Me:
Software Engineer (C++, Outdoor enthusiast, RC vehicle fan Interests lie with unmanned systems (air, ground, water).
Please tell us a bit about your UAV interest
Working on an assortment of quad projects, both for work and for play.
Hometown:
Southern New Hampshire
Activity Feed
"Hi Janis
Thanks for the info.
From the wiki, it states
"In UgCS for DJI the value of zoom level is displayed between zoom buttons. This value varies for different DJI cameras according to camera value range. Therefore, before defining the Set…"
Thanks for the info.
From the wiki, it states
"In UgCS for DJI the value of zoom level is displayed between zoom buttons. This value varies for different DJI cameras according to camera value range. Therefore, before defining the Set…"
HiIs there a way to have the drone continue to record video (it stops right now) as it goes through a stop and turn?How is the zoom value controlled with UgCS for a Mavic Pro Zoom?Thanks...
HiThe Zoom control doesn't seem to make the camera zoom in or out. We've had to manually set it before a route. Is there something I'm missing? Is the Z30 a supported camera? If not, is there a list of supported cameras? If so, what are expected…
HiI've been able to set one of the waypoints as the 'start point', will that make the return to home point also? If not, how do I make the start point the return point? The route became numbered in a way that the 1st waypoint is in the middle of the…
HiHow does one add a waypoint to an existing route?Also, is there a way to change the numbering of the route's waypoints?Thanks...
"Hi Jason
In case you haven't tried, have you used a USB 3.0 cable to connect your Android device to the DJI controller?"
In case you haven't tried, have you used a USB 3.0 cable to connect your Android device to the DJI controller?"
"I tried this and got the following error from UgCS when trying to create a route from a file:
"Could not import file
Error
Import cannot bee completed: incorrect input format. Please ensure you are importing a file generated by application."
The…"
"Could not import file
Error
Import cannot bee completed: incorrect input format. Please ensure you are importing a file generated by application."
The…"
HiDuring some flights (facade routes), with both a Mavic 2 Zoom and a Matrice 210 RTK, pressing 'Hold' followed by doing some manual flying was done. When Continue was pressed, the quad went back to the original route but did not resume the proper…
HiIn setting up a Horizontal Facade Scan (long tracks left to right, with short steps up), which direction is considered Forward overlap?Thanks...
HiI've flown a route with both a Mavic 2 Zoom and a Matrice 210 RTK and there wasn't any video or images captured. I think I'm missing something, I had the set camera by time, and then by mode (with start recording selected).Please advise, thanks...
"Thanks Janis
I take it, this is done in the Laptop's Mission Editor and not in the UgCS for DJI?
Thanks...
Mike"
I take it, this is done in the Laptop's Mission Editor and not in the UgCS for DJI?
Thanks...
Mike"
"Thanks Janis, guess I'll stick to images. Janis Jonins said:
Hi Mike,
Video files are not supported for geotagging.
Best regards, UgCS Support Team Janis Jonins"
Hi Mike,
Video files are not supported for geotagging.
Best regards, UgCS Support Team Janis Jonins"
HiI've watched this Battery Change video:https://www.youtube.com/watch?v=0w7GSJzU_Qwand was wondering if this could be done mid route in a Facade scan?Thanks...
