Gender
Male
About
Location
Blacksburg, VA
About Me:
Student at VT
Activity Feed
"Hi,
I did this using a programming card that I bought separately, specific for the type of ESC that I use. The card has a lot of pins sticking out from its sides. We change the parameters of the ESC by moving some jumpers that connecting the pins,…"
I did this using a programming card that I bought separately, specific for the type of ESC that I use. The card has a lot of pins sticking out from its sides. We change the parameters of the ESC by moving some jumpers that connecting the pins,…"
"Hi Luke,
I did this a while ago before I switched to 3dm due to noise problem with my (old) VN100. Here is a sample code that I wrote to read data from the VN100. Just attached the IMU to any available serial port of any APM/Arduino board (in my…"
I did this a while ago before I switched to 3dm due to noise problem with my (old) VN100. Here is a sample code that I wrote to read data from the VN100. Just attached the IMU to any available serial port of any APM/Arduino board (in my…"
"Nice work Tom, do you add some jumper wires to the ArduPilot board?"
"Thanks Yves. I'll try it out."
Hi All, I am working on dynamics model development of my aircraft. I want to use ArduIMU+Pilot as a data acquisition hardware. I am going to disable all autopilot functions and make the board perform measurements and send it down through XBee. In…
"@Sandro : I use V2, and I had similar symptom at first. Changed line 20 of the code to
#define ENABLE_AIR_START 0
then it works.
I used the IMU w/o GPS and got a noticeable adverse response (especially in roll mode). Does anyone get the same…"
#define ENABLE_AIR_START 0
then it works.
I used the IMU w/o GPS and got a noticeable adverse response (especially in roll mode). Does anyone get the same…"
"Great work Jordi, thanks. Does it have data logging capability?"
"Wow, great works !!!
Can't wait to play with it.."
Can't wait to play with it.."
"Thanks, I'll check the Paparazzi out."
"Thanks for the concern, I will let my department aware of this issue.
Yes, I'd love to have ArduPilot Mega onboard, but unfortunately I have to start my project right away, so ArduPilot is my best option for the time being (if it can handle 2 way…"
Yes, I'd love to have ArduPilot Mega onboard, but unfortunately I have to start my project right away, so ArduPilot is my best option for the time being (if it can handle 2 way…"
Hi everyone !I am planning to build a flying laboratory for automatic control development. I am really interested in using ArduPilot (The ArduPilot+ArduIMU config.) as the core, since it is simple, affordable and yet powerful (great work guys!!!).I…
