Gender
Male
About
Location
Cape Town, WP
Please tell us a bit about your UAV interest
Mostly Quads
Hometown:
Cape Town
Activity Feed
"Nice work Max.
Once you've tuned it, would you mind sharing your param file?
Thx"
Once you've tuned it, would you mind sharing your param file?
Thx"
"My Quad
NTM 1000kv motors, 3S 3300mah battery and 30A esc. These are 11" props, but also tried my original 10" props, same thing. Total weight of the quad is 1.4kg and the thrust per motor should be around 0.8kg
per motor. Only thing different is…"
NTM 1000kv motors, 3S 3300mah battery and 30A esc. These are 11" props, but also tried my original 10" props, same thing. Total weight of the quad is 1.4kg and the thrust per motor should be around 0.8kg
per motor. Only thing different is…"
"Now i dont know what to do next, I've exchanged everything back to the old ESC's, old motors and old battery and still the right back motor get extremely hot!
All the APM stuff is done, leveling, radio calibration, etc.
I maybe thought it could be…"
All the APM stuff is done, leveling, radio calibration, etc.
I maybe thought it could be…"
"Update: Changed out the motor and still having the same issue. The ESC on that side also seems a bit hotter than the rest. Im using a seperate BEC for the power of the board etc, so disconnected the power cable on all ESC's.
Are my thinking correct…"
Are my thinking correct…"
I have an issue with one of my motors thats getting extremely hot. I changed my ESC's and battery yesterday to 4S. Before I used ESC's and 3S battery on the same rig, without issues. Its a quad, X configured, but now the back rightside motor get so…
"Very nice!"
Hi,Im relatively new to APM. I have the APM2.5 with latest Arducopter firmware loaded. I've tuned out my Stabilise flight and its sweet, but I cant seem to tune in AltHold. As I understand it, it doesn't help going on the loiter or anything else,…
"I have the same issue, over time, when hovering in stabilize mode, the copter seems to yaw clockwise. If I correct this, it starts to yaw counter-clockwise (slowly).
What I've done so far (any maybe if you haven't done this Kim, you can try), is re…"
What I've done so far (any maybe if you haven't done this Kim, you can try), is re…"
"It propably looks like alot of elecs, but its just the normal APM2.5 board, my HUGE x9 RX (will replace with FrSky soon), the 3DR telemetry at the back and the GPS at the front. The rest is all the ESC cables."
My first APM and first H-Quad. Im am VERY pleased, this is the maiden, unfortunately its indoors as it was raining outside, but it is very stable. Using the default out of the box settings. Sorry for the bad video, had to use my phone and it has an…
"I mailed them in the past week and their answer to me was within the next month .... :("
