"Today made three autonomous flights.
After several calibrations and several tests, I came to an end with three (3) autonomous flights. everything working 100% with the Mission Planner.
Thank You.
Configuration:
- T-Engine AIR GEAR 350 Set
- Motor…"
"today made three autonomous flights.
After several calibrations and several tests, I came to an end with three (3) autonomous flights. everything working 100% with the Mission Planner.
Thank You."
"Good friends, I've decided my problem. The PX4 did not want to fly, the low speed of the motors, then recalibrei all over again.The radio has been reconfigured and altered values were:TRV ADJTHR MIN -100% / MAX + 130%
then calibrated in the Mission…"
"good, good thing they were lucky.
Because I do not, I suppose that will be the frimware, I see no other solution.I have:- T-ENGINE AIR GEAR 350 Set (920kv)- ESC AIR20A 600Hz
and simply Pix, does not transmit any power to the ESC. it does not fly.
I…"
"Hello, I need help.I discovered something important.Once you have calibrated all, including the ESC. Remember Me, to calibrate the engines, I had 100% of the power in the engines. Bad when I try to fly I have 10% of power in the engines.
As it…"
"Good, I give you every reason I made the same mistake, I bought this flight tracker with T-MOTOR and individual ESC. I was sad because the driver and software are very weak.I have a CC3D controller, this is a machine with my QUADCOPER, bad…"
"Good Guys, problem solved ...............
So what as been resolved.!
- My PPM Encoder was not properly connected ... was only testing the coneções as are individual encaxe ..Roll (1) - AileronsPitch (2) - ThrottleYaw (4) - RudderThrottle (3) -…"
"Boas pessoal sou novo neste forum, desde já prazer em poder acompanhar.
Tenho uma pergunta desde já pertinente.
Alguém sabe explicar qual a diferença entre os softwares APM Planner 2.0 e Mission Planner.