Gender
Male
About
About Me:
Interested in UAV and learning electronics
Please tell us a bit about your UAV interest
F
Hometown:
Orpington
Activity Feed
"The MINIMOSD 2.3. pre-release:596 overlay stops after a few minutes into a flight. Recent change was an upgrade to apm 3.1. I've embedded a video showing the failing overlay. Option to switch between multi-screens is disabled. Issue only…"
"Here's a flight test with 2.3.R605. A few observations: strange duplicate characters by the VS reading during descent, the artificial horizon looks off, leaning to the left, and the altitude readings sometimes look a little off. In this flight I…"
"Here's a test flight with 2.3 R598. just a small comment, I noticed the 2nd screen flickers (see 1.39sec) instead of displaying the warning message but screen 1 works as expected.
This is such a capable compact OSD, perfect for the APM2x…"
This is such a capable compact OSD, perfect for the APM2x…"
"I recently had a similar issue which turned out to be power related. When I powered the APM board and gimbal servers using a separate lipo from the brushless motors the glitch or twitching stopped. I suspect noise from the motor ESC's was causing…"
"Which versions of AduCopter supports RSSI? Looking back through the posts it looks like 2.60 worked from that point forward supported was dropped. Hopefully I wrong and some kind person can reply with the correct facts and clarify steps needed to…"
"Is EZUHF RSSI supported and if so what steps are needed to get this working? I've seen some videos on the web apparently showing the combination working, I don't know if this is a tease but unfortunately there's no detail on what code changes or…"
I wanted to share my experience with the loiter mode on the APM2.0 mediatek GPS onboard and APM2.5 with external uBlox GPS.Generally the default settings included in 2.7x or 2.81 work well, altitude hold is accurate, hover is stable and stable mode…
