Gender
Male
About
Location
Plzen
About Me:
Mechanical Engineer, university staff electronic amateur
Please tell us a bit about your UAV interest
UAV rookie, but trying to grow up
Hometown:
Pilsen
Activity Feed
"@Halil, Hi. It is possible to add something like teleconverter to this camera or different lens? We need FOV approx. 3° at max zoom. "
"Hi Fredia,
I would like to ask you to add a "read only" mode in future releases. I some cases it would be great and safe to use such a mode. I would prefer to to use such a mode in case of two men operation, one pilot and one camera operator.
Best…"
I would like to ask you to add a "read only" mode in future releases. I some cases it would be great and safe to use such a mode. I would prefer to to use such a mode in case of two men operation, one pilot and one camera operator.
Best…"
"Hello VGR,
the sketch is made in SolidWorks CAD. For similar sketchs you can use almost any 2D CAD... freeware or regular.
regards"
the sketch is made in SolidWorks CAD. For similar sketchs you can use almost any 2D CAD... freeware or regular.
regards"
"Hi all,
Great concept. But the mechanism would not to work. If you expect rigid joint and parts the mechanism has 0 DOF. Check the mechanism again before manufacturing.
regards,
Peter"
Great concept. But the mechanism would not to work. If you expect rigid joint and parts the mechanism has 0 DOF. Check the mechanism again before manufacturing.
regards,
Peter"
"Hi,
I finally solved the problem. In my case it was truly bad and accidental setting of one parameter (PILOT_VELZ_MAX cca 32000). Now it flies OK.
Thanks for yours answers.
Regards Petr"
I finally solved the problem. In my case it was truly bad and accidental setting of one parameter (PILOT_VELZ_MAX cca 32000). Now it flies OK.
Thanks for yours answers.
Regards Petr"
"Randy ,
Thank you for the solution. I have checked x-times all the parameters about altitude, power, PIDs.. but didn´t thought that this parametr it could be.
It was definitely the PILOT_VELZ_MAX. Now pixhawk flies great. I need to precise the…"
Thank you for the solution. I have checked x-times all the parameters about altitude, power, PIDs.. but didn´t thought that this parametr it could be.
It was definitely the PILOT_VELZ_MAX. Now pixhawk flies great. I need to precise the…"
"Hi Randy,
Thank you for your answer. The vibratitons were the first thing I checked and it seems to be OK:
Do you have another idea? Me not.
Regards Petr"
Thank you for your answer. The vibratitons were the first thing I checked and it seems to be OK:
Do you have another idea? Me not.
Regards Petr"
"Hi all,I have an unexpected problem with my new quadrocopter with the pixhawk and AC 3.1.5.If I switch to the ALThold mode during the flight the copter became a rocket. It climbes on the full trottle until I switch it back to stabilaze mode. I cant…"
Hi all,I have unexpected problem with my new quadrocopter with the pixhawk.If I switch to the ALThold mode during the flight the copter became a rocket. It climbes on the full trottle until I switch it back to stabilaze mode. I cant find the problem…
