Gender
Male
About
Location
KL
About Me:
Love mountain biking, Motocross and music. Live in Malaysia, but i'm originally Welsh.
Please tell us a bit about your UAV interest
Love fpv planes, currently own a sky surfer and hover one.
Hometown:
Swansea
Activity Feed
Hi there guys,First post on the forums :) I've had this problem for the last few weeks and I can't crack it!My battery monitor for my Pixhawk is working BUT the readings only shows up on monitor 2. It's plugged into the battery port of the Pixhawk…
Hi guys, Purchased a 9XR around a month ago, arrived, and the left gimbal was not functional at all. After going through on the internet i checked the connections and they were out. After connecting them it worked once again. However it kept jumping…
"Ok guys, Thanks for all you wonderful advice. Telemetry Is all up and running, only problem i'm unfortunately having is that i'm not getting any responce from my RC receiver when plugged into the Pixhawk through the Encoder. I've tested it with a…"
"Update!
Found an encoder in the packaging for the FR sky receiver so that i can connect it to the pix hawk :)
Also i've connected my ground station to the computer, and checked the net id which is 25, however i CAN'T see my Net Id of the remote…"
Found an encoder in the packaging for the FR sky receiver so that i can connect it to the pix hawk :)
Also i've connected my ground station to the computer, and checked the net id which is 25, however i CAN'T see my Net Id of the remote…"
"Michael, Where can i locate the Sbus on the D8r and to which port did you plug it into?
Thanks
Rhys Gittoes"
Thanks
Rhys Gittoes"
"Hello thanks for the quick reply.
Ok so it seems i'm going to need some more hardware then correct?. I'll look online for one of those :)
For the telemetry I cant see that Net ID of each one, under status it just says fail?Screen Shot 2015-06-15…"
Ok so it seems i'm going to need some more hardware then correct?. I'll look online for one of those :)
For the telemetry I cant see that Net ID of each one, under status it just says fail?Screen Shot 2015-06-15…"
Hello everyone, So today i've received all my parts to build an FPV plane and have been assembling as well as calibrating all the equipment and have reached two bumps in the road.Firstly I cant connect my Pixhawk to my laptop via telemetry because…
