Please tell us a bit about your UAV interest
UAV
About
Hometown:
Stockholm
Activity Feed
"Hi
Some questions
Is it possible to restart the mission or change the WP. Like in Mission planner
And why is DO_Digicam_Control not supported?
Even after loading a mission from the drone, the commands disappear.
Even if they are not supported it…"
Some questions
Is it possible to restart the mission or change the WP. Like in Mission planner
And why is DO_Digicam_Control not supported?
Even after loading a mission from the drone, the commands disappear.
Even if they are not supported it…"
"Hi
I had this error when I was trying Auto Takeoff.
I had my ARSP_MAX too low at 18ms and when it lauched it got up to 20m/s. I changed that to 25m/s now
The other thing I changed is the Airspeed sensor. (cheap HK kit) that I dont think was working…"
I had this error when I was trying Auto Takeoff.
I had my ARSP_MAX too low at 18ms and when it lauched it got up to 20m/s. I changed that to 25m/s now
The other thing I changed is the Airspeed sensor. (cheap HK kit) that I dont think was working…"
HelloIm searching for a pair of dongles that can run RTKLIB ie raw dataSuch as neo-m8t Lea-4t or neo-6tWith or without antennas dep on price and typeits for a diy project so im looking for reasonable prices./John from Sweden
HelloI have started doing some survey missions with my 1900mm skywalker.I have encountered two problems.1: when doing a survey the plane woud pass WP1-3 and when trying to pass WP 4 It would loop a couple of times then the plane proceeds to…
HelloI need some help with a project we are working on.Lets say we want to do a survey and have done a mission for that.To trigger the camera we use "DO_DIGICAM_CONTROL"Now, we would like to make a Python script that listens to and when…
"I will try the above when I get back to our shop. Will try the XP if its ready too. thx!"
"That should work.
I use the following batch file:
set hr=%time:~0,2%if "%hr:~0,1%" equ " " set hr=0%hr:~1,1%
gst-launch-1.0.exe -e -v udpsrc port=9006 buffer-size=60000 ! application/x-rtp,encoding-name=H264,payload=96 ! rtph264depay ! h264parse…"
I use the following batch file:
set hr=%time:~0,2%if "%hr:~0,1%" equ " " set hr=0%hr:~1,1%
gst-launch-1.0.exe -e -v udpsrc port=9006 buffer-size=60000 ! application/x-rtp,encoding-name=H264,payload=96 ! rtph264depay ! h264parse…"
"Works like a charm on my w7 machine. Well done!
We log every flight so we use tee and filesink while watching the stream, ive tried to add filesink but it didnt work
Would it be hard to add ?.
Are you going to release the source?
if not here is a…"
We log every flight so we use tee and filesink while watching the stream, ive tried to add filesink but it didnt work
Would it be hard to add ?.
Are you going to release the source?
if not here is a…"
"Patrick: If it is not too much hustle it would be great!, otherways ill have a reson to upgrade:)"
"Workd on my W8 machine. Ive read that it may be the compiler u are using is not compatible.
http://stackoverflow.com/questions/11305633/xxxxxx-exe-is-not-a-val..."
http://stackoverflow.com/questions/11305633/xxxxxx-exe-is-not-a-val..."
""... is not a valid Win32 application"
On Win XP SP3"
On Win XP SP3"
"Thx! Hoppfully that Will fix the problem. Will try and move the gps a little bit more."
"During some tests on our drones we noticed that if you start a stream on the PRI, the GPS would lost all sats for 1-2 sec - resulting in a failsafe. We use both APM and Pixhawk, latest ver.
Wisp Station M5 on air and Rocket on CGS.
It only happens…"
Wisp Station M5 on air and Rocket on CGS.
It only happens…"
"What kind of wifi adapter are you using?"
"how long ago did you update your PI?
http://www.raspberrypi.org/documentation/raspbian/updating.md
Also the PI draws more mA when using the camera from 500 to 700mha i think, enough power supply?"
http://www.raspberrypi.org/documentation/raspbian/updating.md
Also the PI draws more mA when using the camera from 500 to 700mha i think, enough power supply?"
"Try this on the gcs
gst-launch-1.0 -v udpsrc port=9000 caps='application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, framerate=30/1' ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink sync=false
is what I…"
gst-launch-1.0 -v udpsrc port=9000 caps='application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, framerate=30/1' ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink sync=false
is what I…"
