Gender
Male
About
Location
Rotorua
Please tell us a bit about your UAV interest
Just a hobby interest.
Activity Feed
"This is now fixed in 1.2.86!
I have had 100% successful connects since upgrading to 1.2.86 today."
I have had 100% successful connects since upgrading to 1.2.86 today."
"I removed MP 1.2.85 and installed 1.2.84. Connect to APM 2.5 is now working reliably again."
"Same problem here. Was connecting (via USB) fine on 1.2.84 but now on almost always times out on 1.2.85. I have tried resetting the APM 2.5 but still no go."
"Sorry, I should have given some version information in the message above.
I am running Mission planner 1.2.53 and APM 2.5 with 2.9.1b"
I am running Mission planner 1.2.53 and APM 2.5 with 2.9.1b"
I and a few others have noticed that the battery voltage displayed in Mission Planner is incorrect. I am seeing about 0.4 - 0.6 volt difference from that measured at the battery input on the 3DR Power module. The ability to calibrate this has been…
On MP 1.2.53 I am unable to calibrate the 3DR Power module.The opion to enter the "APM input Voltage" has dissapeared frrom the Battery Monitor configuration page.This is giving me a battery voltage calced of 10.9 volts against 11.28 volt measured…
I read somewhere recently that it is planned for MP to merge into Qgroundcontrol and then dissapear. I cant find the article now so sorry, no link to it. What are your thoughts on this? I loaded qgroundcontrol last night and found it difficult to…
Hi,I am getting the following error when updating MP from the Help page.My current version of MP is 1.2.36. Is anybody else having this issue?Cheers, Roger...
