"Hey MR, this looks suspiciously similar to what happened to my friend's quad.
Looking at the logs, I see RCIN C4 centered but at the same time under ATT the DesYaw gets the quad spinning.
The same thing happened in our case, with no control when it…"
Hello,One of my friends has a quadcopter that developed a strange behavior. All of a sudden, the only thing it does it rises about 50cm to 1m and spins clockwise, without any response to inputs. Today we did a full erase and install of 3.2.1, redone…
"After building a big quadcopter with U8 and 28" props, what I can tell you is that at those low revolutions, more dampening was making things worse. I started with the Pixhawk mounted on those rubber dampeners but it was barely flyable. Now it sits…"
Looks like your advice was the winner, we had 3 good flights today, after switching to a BEC to power the Pixhawk. The voltage is now 5.2 +/- 0.05 through the whole flight.
I was puzzled by the mag2 readings, but I guess that must be…"
"You know what, you might be on to something here, I noticed both the gps and i2c plugs seemed not seated properly, whell not actually the plugs but the little pins inside. After the first happening (63 log) we changed the gps and made sure every pin…"
"That was the altitude when it happened the first time. The copter flew perfect in both stab and althold for at least 4 flights prior to adding the GPS+mag. That was my understanding as well, mag not affecting the pitch/roll and I'm not saying it is,…"
"Thanks for looking, I think the log is not complete since the battery got ejected on the way down.
Apart from the pitch and roll not following perfectly, although in the air the copter is flying good, the only thing out of the ordinary I find in…"
Hello Gentleman,Long time lurker around here, but found all my answers in your informative posts. Well, util recently that is.We have a strange problem with one of our multis, an X8 with Pixhawk running 3.2.When originally built, we did not have the…