Gender
Male
About
Location
Perth
Activity Feed
"These guys have put some much time not to mention their own money into this and people keep complaining re the price?? Thanks for all of your efforts and constant support 24 7 I personal think the charges are ridiculously low considering all things."
"Thanks for the replies.
I have made many successful flights with the throttle connected directly to the RC receiver. All of my connections from RX to autopilot to servos have a choke to help stop RF feed back. Unfortunely this may or maynot have…"
I have made many successful flights with the throttle connected directly to the RC receiver. All of my connections from RX to autopilot to servos have a choke to help stop RF feed back. Unfortunely this may or maynot have…"
Help need with the Failsafe 2.6I lost a gas UAV from what appears to be a failsafe issue.V2.6 with IMU V2 shieldThe transmitter low set point for throttle was 1070ms, #define SET_RADIO_LIMITS 0Failsafe set point set to 1250ms using a Spectrum…
"Possible cause as to climb
An increase in airspeed eg throttle will cause a climb if the aircraft dose not pitch nose down to reduce the extra lift cause by the increase in airspeed.
I think this was happening when I was using 2.4.3
As I tried to…"
An increase in airspeed eg throttle will cause a climb if the aircraft dose not pitch nose down to reduce the extra lift cause by the increase in airspeed.
I think this was happening when I was using 2.4.3
As I tried to…"
"Jason I got to fly the 2.5 code today looks great. Good work to all involved is a major improvement to the continuing development of Ardupilot. With not changes to any gains it work OK with my supacub.
The stabilized mode works I will need to tune…"
The stabilized mode works I will need to tune…"
"Jason
I will have time this weekend to do some flying with the new 2.5 Beta code
Currently iam using 2.5 airframe_tester_beta4
If you like I can try out the latest 2.5 with GPS if it availably where and how do I access it?"
I will have time this weekend to do some flying with the new 2.5 Beta code
Currently iam using 2.5 airframe_tester_beta4
If you like I can try out the latest 2.5 with GPS if it availably where and how do I access it?"
"Jason I cut pin 13 back and it seems to work every time.
For some reason it just dose not like the power supply coming from my ESC I am connecting a battery to the receiver and have removing positive pin from the plug coming out of the ESC. As I…"
For some reason it just dose not like the power supply coming from my ESC I am connecting a battery to the receiver and have removing positive pin from the plug coming out of the ESC. As I…"
"Jason / Chris here is the data that I think you asked for ?
I have managed to get it to run 100% of the time without the shield and having both jumpers inplace as per chris drawing.
It seems that the main problem that I was having is the ESC power…"
I have managed to get it to run 100% of the time without the shield and having both jumpers inplace as per chris drawing.
It seems that the main problem that I was having is the ESC power…"
"Jason I changed the radio type to 1 as per my radio and it stoped at
Waiting for Radio
No throttle input detected"
Waiting for Radio
No throttle input detected"
"Chris
With shield removed, and the throttle at the lowest settings, I get
Waiting for Radio
No throttle input detected
Radio IN: R:1448 E:-24 T:-24 Analog IN: 0:511, 1: 511, 3: 511 S
ensors: ir_max:150 roll:5 pitch:5 airSp:0 PWM OUT: R:1500…"
With shield removed, and the throttle at the lowest settings, I get
Waiting for Radio
No throttle input detected
Radio IN: R:1448 E:-24 T:-24 Analog IN: 0:511, 1: 511, 3: 511 S
ensors: ir_max:150 roll:5 pitch:5 airSp:0 PWM OUT: R:1500…"
"Should I have the GPS plugged in ??"
"Ok I give it a go and get back to soon"
"I have a JR PCM9X2 with a Spektrum DM9 2.4ghz Module the reciver AR7000"
"Chris / Jason I have reloaded code and place jumer as per chris drawing opened serial terminal as per request and this is where its hanging now Iam following the instructions and nothings further is happening . Here is a copy of the massage.
Init…"
Init…"
