Gender
Male
About
Location
Sao Paulo
About Me:
I am an engineer, and I practice aeromodelling in times of slack.
Please tell us a bit about your UAV interest
Aerial photography, Hobby
Hometown:
Sao Paulo
Activity Feed
"Please look this topic http://diydrones.com/forum/topics/ardupilot-mega-2-5-communication-...
Permalink Reply by Peter Jobbagy on May 12, 2013 at 5:34am
Hi there! I got my apm 2.5 board at yesterday, and when i tried to update firmware first…"
Permalink Reply by Peter Jobbagy on May 12, 2013 at 5:34am
Hi there! I got my apm 2.5 board at yesterday, and when i tried to update firmware first…"
At Mission Planner, under Configuration, there is an option to choose a video input.Sometimes I use a EasyCap card and I can get the video back of the artificial horizon in Mission Planner.But the recording options are limited to 5 frames per…
Yesterday I had the opportunity to test the 3DR Radio 900MHz.On first impression I could see that he is much smaller and lighter than the Xbee.I upgraded the firmware to v1.5 (the card that goes in the model airplane need a FTDI cable).I made…
"I had similar problems with my Xbee bought at Digikey.With X-CTU, one card is recognized correctly and had no problems, since the other (which will in model aircraft) was not recognized.I installed the firmware XBP09-DP forced and still did not…"
"Nice job man.
I intend to do something like this too.If you want to generate a 3D mesh (without precision of course) the way is to send pictures to the site http://www.hypr3d.com/, and they automatically and for free, make the 3D mesh.
Look what the…"
I intend to do something like this too.If you want to generate a 3D mesh (without precision of course) the way is to send pictures to the site http://www.hypr3d.com/, and they automatically and for free, make the 3D mesh.
Look what the…"
