"Thanks!"

"Thanks for taking the time to sharing your work Terry. I now have a bit better understanding of what is required (for the compass/GPS bit anyway)."

"I have seen some clever ways of hooking up the GPS and Compass, but no-one has shown how they have hooked up their inputs (Rx) or outputs (motors/servos).
If anyone has worked out an elegant way of doing this could they please post pictures."

"I like the way you have hooked up the GPS/compass.
I am surprised that we have to do this sort of thing though. Surely the designers would have known that external GPS/Compass modules would typically have two cables (not one).
Does anyone know of an…"

"Thanks for the info Andrew. Looks good so far.
Please continue to keep us updated on your progress."

"Thanks Dieter."

"I'm surprised that there is an internal compass jumper on these boards (I hadn't noticed that before) as the spec states 'No onboard compass'. Strange.
Out of interest, did the (external) compass work before you cut the jumper?"

"Hi Dieter,

Have you been able to test the board?
As there is precious little independent information about these boards publicly available any review of the board would be greatly appreciated.

Cheers,
Shane."

"did you buy one?

No, not yet - I'm waiting for some early-adopters to report if they are any good :)
I would be interested to see how you hook up the servos, and exactly what the white connectors are (are they DF13, or DF13-style?)
Hope your board…"