Gender
Male
About
Location
Limburg
Please tell us a bit about your UAV interest
Sinds the tech. is available i really got fascinated by it and started building... Giving you this totally different experience wen flying FPV.
Hometown:
Zepperen
Activity Feed
Hey Guys,I got my Asus TF303 setup with telemetry module connected.The tablet gps coordinates guides the copter to follow that signalacting as the controller guiding the drone.I think i still need to tweak some things to get i working better butthe…
Hey Guys,I made some 3d printed parts for having a easy transportable groundstation, well i could just usethe table only, but you know for safety and regulation wise,..... it needs maybe some change to makeit a bit stiffer around the transmitter…
"My OTG cable works perfect with my asus TF tablet, om the nexus 4 its a no go!On my gf samsung mini it also doesnt work.Still I guess the Bluetooth way is your best option, good luck with it!Quick tip,
If you want to know witch phones work, go to a…"
If you want to know witch phones work, go to a…"
"No you dont need the OTG cable, you will have to make you own cable
that will connect the 3dr with the bleutooth.The bleutooth will work as a bridge instead of the OTG cable.Take a look at Dennis Baldwin diy…"
that will connect the 3dr with the bleutooth.The bleutooth will work as a bridge instead of the OTG cable.Take a look at Dennis Baldwin diy…"
"It the phone not supporting, this problem is also for tablets!Here is a link to a list of tables that work, for the mobile phone you will
have to connect the 3dr to a bluetooth module that pairs with your phone.see this link,..."
have to connect the 3dr to a bluetooth module that pairs with your phone.see this link,..."
"Well i did a reset also started again from the scratch values and it works, for some odd reason or something i did wrong!"
"I am Flying in acro mode while tuning the Rate Pid's."
"Bump! Anybody?"
"bump still cant make flips!"
Hello,A whyl back i bought the blacksnapper from globeflight, but i removed the naza m controller and put it inthe TBS disco. Therefore i bought the apm 2.6 to use with the black snapper and use some other parts forthe build up. It now fly much…
Hey guys,I was tuning the Rate PID of my quad with APM2.6 FW3.1.5, then i came to I rate to makeit keep the angle bacause it was leveling out all the time, nomatter what value i would set it to.. So found out on the ardupilot site that default…
"So,Thx to Jcampen and Abeneman to problem for the hexacopter got fixed.It was an overseen issue but is now fixed in the new firmware release!Thx Guys"
"For those who would come across this bug, it has been reported to the app creator and is looking into it!you can find the topic on https://github.com/DroidPlanner/droidplanner/issues/719Hopefully marco find a solution.
grtz"
grtz"
