Gender
Male
About
Location
Dubrovnik
About Me:
Professor Environmental Science Oceanography
Please tell us a bit about your UAV interest
Building giant scale Catalina PBY with 3d cameras Looking for stabile, safe flights
Hometown:
Zagreb
Activity Feed
"Hi Avi,
Yes, I solved the problem. It works when channel 1 is set to FLAPERON (func=5) and channel 5 to AILERON (rc5_func=18). Recalibrate the radio and then just COPY ALL the parameters from channel 1 to channel 5. Be sure to click WRITE when done…"
Yes, I solved the problem. It works when channel 1 is set to FLAPERON (func=5) and channel 5 to AILERON (rc5_func=18). Recalibrate the radio and then just COPY ALL the parameters from channel 1 to channel 5. Be sure to click WRITE when done…"
Does anyone know how to set up the APM 2.5 so the flaperons work. I have right wing aileron on RC1 and left wing servo on RC5. In no case the left (RC5) servo moves. I used the function code 5 (for flaperon) and tried 18 (aileron). But there is no…
In my 1/8 Catalina PBY I have an on board pneumatic pump with a small tank for wheel retracts. I installed the pump since the valve leaks just a little bit (pressure 6-8 bar). After installing the ArduPilot 2.5 had to replace the brushed motor with…
