Gender
Male
About
Please tell us a bit about your UAV interest
Mostly hobby, aerial photgraphy, and recreational flying
Hometown:
Central Arkansastan
Activity Feed
"It appears correct that you have to be moving the craft in order for it to stay running. I ran it without props, moving the craft in the direction of my sticks and she ran without issue. Almost have my stand ready."
"That's funny!!! Ive got an old unused Christmas tree stand that will work as a good base for it!"
"Hey, long as it works!!"
"I'm going to have to construct something bigger, my quad is almost 1000mm."
"That's a great idea! If you don't mind I'm going to copy that, and test it. I have constructed an engine test stand that measures torque in grams and watts/amps used as well. The engines checked good on that. At least with a stand I can see if it…"
"Thank you for looking. Oddly enough, it did this same thing with the last PIX I had installed. I thought it was just a bad unit, so I replaced power lead, and unit itself.I am tempted to press on with final assy and fly in an open soft field and see…"
"Do they show anything?"
"More BIN files2 12-31-1999 6-04-22 PM.bin3 12-31-1999 6-03-12 PM.bin4 12-31-1999 6-03-50 PM.bin"
"Here is the BIN file, when I try to Run the "analyze log" button, it just ends up with "bad input file.1 12-31-1999 7-08-48 PM.bin"
"Thank you! I will download them this evening when I get off work."
"I do not know how to read them. Yes, I'm not well versed in Pix. This is first time using one. I have read and read till I'm blue in face trying to figure this out. And I thank you in advance for your help."
"Yes, this i understand and it does exactly that. In my case, I can have throttle to the wall, and just move the other stick over or up, down, and it wil shut down. I am using stock power hook-ups, (the cable with the chip, and wires that go to the…"
hello, I have a quad I have been building, and have an issue. I had a problem with pixhawk where every time I would use Ele or Ail (props off) for more than about 3 seconds, the whole thing just beeps and shuts down.I then have to re-arm (throttle…
