About

Hometown:

Redding CT


Activity Feed

Tom Sozzi posted photos
Aug 19, 2014
Tom Sozzi posted a discussion
i have a sony optical 3x camera lens system and also have a tremendous urge to locate its power inputs and its video out pin. if anyone knows of a website or knows exactly how to tap into this lens give me a call at 203 733 1455 or reply to this…
May 16, 2010
Tom Sozzi posted photos
Mar 21, 2010
Tom Sozzi posted photos
Dec 1, 2009
Tom Sozzi posted a discussion
how far is the transmission range on this when in fpv mode?im considering a purchase of this system because the system i ordered from rangevideo is absolute crap.would this be a good fpv system and would it be a good investment.if it isnt, who sells…
Nov 12, 2009
Tom Sozzi posted a discussion
my specs are as follows.....-wing span is 2 meters-root chord of frame is 12"-Tip chord is 6"-all wing ribs are cut from a 1/16" carbon fiber plate-there are six ribs on one wing-spars are 0.5" by 0.5" by one meter-there are three spars on each…
Sep 30, 2009
Tom Sozzi posted photos
Sep 28, 2009
Tom Sozzi posted a discussion
I saw an image on the homepage of a flying wing with this module installed and a laptop with the other part of the system connected to it. this made me wonder about what it's for. my recent UAV is capable of carrying an eagletree telemetry system…
Mar 13, 2009
Tom Sozzi posted photos
Mar 7, 2009
Tom Sozzi replied to Tom Sozzi's discussion Lipoly batteries (problem)
"wait, it possibly could be that i half charged the battery because i was afraid of burning up the electronics for it is a big battery. instead of charging for an hour i charged for 30 min. could this be the issue?"
Aug 1, 2008
Tom Sozzi posted a discussion
recently my chargers that i charge lipolys off of, are telling me that the battery volts are low. ive been using a brushless esc with a lipoly low voltage cutoff (electrifly 25 Amp)and thunder power lipolys. ive been using all the proper equipment…
Aug 1, 2008
Tom Sozzi posted photos
Jul 9, 2008
Tom Sozzi posted a discussion
i own a futaba 6exp w/ ppm/pcm selectable feature.i was curious as to how far away my UAV can be from the "control base" W/out losing signal from the remote. i was hoping somwhere along the lines of at least 2000' or above.i would like to have this…
Jul 9, 2008
Tom Sozzi posted a blog post
what i was trying to do was to put some sort of transmitter inside my plane, and while in flight, it would transmitt my UAV's position to some sort of monitor which would show its position on the map. this way i would know exactly where i am while…
Jun 7, 2008
Tom Sozzi posted a blog post
i know of many sites to purchase parts for robots and airplanes, but is there a website completely deticated to selling parts for UAVs?
May 23, 2008