Gender
Male
About
About Me:
Aerospace engineer
Please tell us a bit about your UAV interest
Hobby
Hometown:
Lexington Park, MD
Activity Feed
"Thanks Johnex, That cleared things up with the flight modes- Im back to POSHOLD and POSITION is no longer available.
I am still unable to download logs in the CLI with Mission Planner 1.3.10.4 build 1.1.5399.10754. Can anyone else confirm this?"
I am still unable to download logs in the CLI with Mission Planner 1.3.10.4 build 1.1.5399.10754. Can anyone else confirm this?"
"I could be wrong, but updating mission planner "shouldn't" fix my situation. In my case the RC Transmitter is commanding the flight mode "POSITION" via CH 5 pwm, and the flight controller (HKPilot 2.7) is not responding to that command. The Mission…"
"Randy / Developers, Absolutely amazing piece of software. Love the new capabilities.
Despite excellent flying qualities, I noticed several odd things today. Keep in mind this is my first flight with anything newer than 3.1.5.
Flying 3.2 RC12 with…"
Despite excellent flying qualities, I noticed several odd things today. Keep in mind this is my first flight with anything newer than 3.1.5.
Flying 3.2 RC12 with…"
"No, I'm still looking. You have one available ?"
"Ian, I just built my 1st quad on the same frame. I went hobby king with 1000 kv NTM 28-26 motors, and 10" 4.7 cheap plastic props. When running a 3S 5000 mah bat i get 12-15 min of flight time. It's snappy and flew pretty good without tuning. After…"
Got a hobby king Tarot with a missing circuit board chip. Hoping to use someone's old broken board and canabalize it and soldier it up.Make offerThanks
"You should still be able to get one on shapeways. Or you can give the STL file to a local printer. I don't have a 3d printer."
"Thanks for sharing! Amazing job
How long did this entire project take you?
Are there more details on the recording of your depth and gps recording elsewhere?
What are your thoughts on http://reefmaster.com.au underwater mapping software using your…"
How long did this entire project take you?
Are there more details on the recording of your depth and gps recording elsewhere?
What are your thoughts on http://reefmaster.com.au underwater mapping software using your…"
"I don't know enough to say this is a global problem (plane / copter), but experienced plane users are experiencing LOITER related navigation issues that sound similar to the issues discussed here. The primary plane developers have either been busy…"
"I have noticed quite a bit of unexplained LOITER and RTL issues when i was trying to solve a plane 2.78 RTL / LOITER issue.
I have no idea if they are related to the bug you describe, but if it helps the developers, here are some unexplained events…"
I have no idea if they are related to the bug you describe, but if it helps the developers, here are some unexplained events…"
"Gary, As for alignment it has been great and very repeatable. I used a Velcro strap that wrapped around the APM and bixler fuselage, and it was the most solid and repeatable mounting solution i have had.( that was without the clear plastic…"
I recently set up my bixler 1.1 and found some unusual behavior on channel 1 in LOITER Mode. Here are my details.APM 2.5 with plane:2.78Power MonitorAirspeed Sensorexternal compassJ1 removed / SBEC 5V/5A on the servo railProblemI was doing some…
"Great job! I'm sure the answer is obvious to the quad guys, but is this diagram specific to an H frame or X frame? Or did I not see that? I know this is 90% of the solution, but I hope to see a fixed wing version of this some day! Thanks for the…"
"If anyone else is still following this... as of Oct 3 2013 i have 13 cases with unusable screws. After 4 or 5 attepts by 3DR to fix the problem they have sent me the same set of screws every time. In the last email back, they now say I am the one…"
"My update on 25 August 2013- After the 3rd attempt to get correct screws i have received the same case and screw set. I am now holding 9 cases none of which have the correct length screws. I don't want to try anymore, but out of humor i will. I'm…"
