Gender
Male
About
Location
Dallas, TX
About Me:
http://williamjgross.blogspot.com/
Please tell us a bit about your UAV interest
Autonomous Rovers, RC Airplanes,
Hometown:
Dallas, TX
Activity Feed
"I have been experimenting with rapid prototyping techniques and being able to produce a drone that is replicable through molds. I have used many different FDM processes and also have a laser cutter. If you are interested in working on a design for…"
"At first the aim would be to control the P/T system and also the UAV through one device. Once this has been built and tested I would like to add more robust hardware and software to allow for people to input their own telemetry GCS. I am just…"
I am working right now on Designing and building a ground control station for smaller rc type UAVs. It will be a handheld device with a video screen to downlink the video feed from the plane. There will also be a joystick to control the movement…
"Another good resource for 3D printing is also this website, http://arttopart.com/ They specialize in 3D printing and can also do 3D laser scanning if you need a part to be replicated"
"Also, Here is the fuselage Im working on. Still have alot of refining to do with the shape and also need to add the elevators. It will be lasercut out of some light material for the frame and then covered with a composite such as fiberglass or…"
"Thanks a ton for the input. The Clark-Y design looks like something that I should use. Is the Clark-Y design more suited for slow flying and simple maneuverability? Also, should I use elevators instead of ailerons? Im looking to do mostly loitering…"
Hello,I am trying to create wings for a UAV project I am doing and have limited knowledge of airfoil design. I have attached some renderings and line drawings of my design that is in progress and wanted to know if someone out there had some advice…
I am in the process of getting my tank up and running and figured Id leave a post of my progress. I have been reading on DIY Drones for a long time now and decided it was time to contribute a little bit. I built the model in Rhino3D and then laser…
