Hi, A few questions about buying an Arducopter. 1) Are the kits and prebuilt models sold at udrones and jdrones considered Aducopter 1.x or 2.x models? 2) I'd like to add telemetry as well as FPV. Udrones offers telemetry but only the 850 motors. …
"Is there a thread anywhere that discussed the inconsistency between the text, diagram and picture about where to plug the ESC into the Ardupilot? The text and diagram indicate OUT 1, but the picture shows it plugged into out 2? I thought I…"
"Hi...back in Sept you wrote
I get this. Me thinks the AVRstudio overwrote something. ANy ideas?
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
----
Did you ever find the problem?…"
"I want to mess with programming the ardupilot but I don't have the ESC yet. Is it Ok to plug a battery directly into OUT 1? I'm thinking the RC receiver batt pack. This should be the same voltage the ESC puts out? Right? This appears to be how the…"
Thanks..helpful. This radio purchase is my biggest stummbling block. Glad to hear the 72mhz radios work Ok. Also, I have the LS2003 on the carrier board, but the connector is not the same. I soldered a header to the board for use with a…"
"Ric,
Thanks...it is the RTF. The radio is the 6EXA. The manual mentions a flap control dial...I was assuming this was one of the AUX controls and was proportional? Of course I'd lose use of the flaps. If I could get this plane without the radio,…"