Gender
Male
About
Location
Tongeren
About Me:
pc (windows based) system and network admin. Basic skills arduino, electronics, rc.
Please tell us a bit about your UAV interest
I have several RC/UAV/MULTIROTOR projects running. From building instructions to programming firmware. You can follow my projects and blogs on: http://wipo-quadrocopter.blogspot.be/ http://wipo-y6copter.blogspot.be/ http://wipo-minihcopter.blogspot.be/ http://wipo-tingoose.blogspot.be/
Hometown:
Tongeren
Activity Feed
This week I tested my (almost) finished mini octocopter wich is build on a 3D printed frame. Motor to motor is 360mm. Max 5 inch prop can be mounted on 18xx or 22xx motors.Flightcontroller: APM 2.5FPV: 700TVL sony cam / 5.8GHZ 25mw /…
""video from the drone without latency"
Really? A digital video link with compression but no latency? I would love to see a comparison video with a standard analog video link (PAL/NTSC over 5.8ghz) like a lot of fpv racers use today."
Really? A digital video link with compression but no latency? I would love to see a comparison video with a standard analog video link (PAL/NTSC over 5.8ghz) like a lot of fpv racers use today."
"@ Rob:
For reliability, look at starting up a gas engine in cold weather. I don't think that you can deny that starting a gas engine in winter or summer is the same. In winter it will take more effort to fire up a gas engine. And it will need a…"
For reliability, look at starting up a gas engine in cold weather. I don't think that you can deny that starting a gas engine in winter or summer is the same. In winter it will take more effort to fire up a gas engine. And it will need a…"
"The reason why choosing this hybrid application and not a helicopter is maintenance.
Although more efficient, helicopters or multirotors with variable pitch props and/or direct drive gas engines will have a higher maintenance frequency and cost.
…"
Although more efficient, helicopters or multirotors with variable pitch props and/or direct drive gas engines will have a higher maintenance frequency and cost.
…"
As from now, you can follow the MultiWii Portal website on Facebook & Twitter.All new multirotors, drones, airplaines or helis that you and others add to our RC aircraft repository are automatically posted to our Facebook or Twitter page.Check it…
Just a short message to announce that the MultiWii Joystick feature I released for MultiWiiConf V2.2 is now available for V2.3There are no changes to GUI or joysticks mode. Just upgrade to MWC v2.3 so that you can use this joystick/gamepad feature…
New platform to share your drones!Create and upload your multirotor, heli, airplane and share it with the rest of the world.This platform can be used by all type of drones (not only drones equiped with a multiwii FC board).Easy to use:You only need…
"Arghhh linux, I will port it to windows!
SMILE ! ;)"
SMILE ! ;)"
"@Dwgsparky: I don't want the LEDs to be always ON by connecting them directly to the battery. I want the leds to be on when the quad is armed and flash when not armed. So I need to connect them to the apm ARM-SIGNAL-PIN.
Watch the video on the blog."
Watch the video on the blog."
"If you would like to use only one transistor you should use another model that can handle the load (current). The transistor I use can only handle one LED."
Today I mounted and tested my led strobe lights. (HK 12volt, 1Watt, corn led)As I'm still a beginner when it comes to flying a multirotor this really helps on orientating and controlling the multirotor.The Led's are indirectly connected to the APM…
"I don't have linux so I'm unable to compile and test it for linux. (same for MAC)
But if someone could help us with this, feel free to contact me."
But if someone could help us with this, feel free to contact me."
Hi, A MultWii blog on the DIYdrones website might seem a little bit strange, but I know most poeple have an APM as well as a MultWii board so here I go.The joystick feature that is available in the APM planner is not available in the MultiWiiConf…
"Hi,
As for my opinion the answer to your question depends on your setup (frame, motor, prop, distance,...) and you should test that yourself. It is possible that different prop size (top, bottom) or different pitch (top, bottom) may be more…"
As for my opinion the answer to your question depends on your setup (frame, motor, prop, distance,...) and you should test that yourself. It is possible that different prop size (top, bottom) or different pitch (top, bottom) may be more…"
Here it is. My third and final foam frame.I ran out of foam so I had to cut out small pieces of foam from my previous foam frames and glued it all together with epoxy. This frame has enough room to mount a 2 cell 1300mAh battery. The battery is now…
"yes, you need 3 x CW and 3 x CCW props (or 3 normal and 3 reverse)"
