Gender
Male
About
About Me:
http://dzlsevilgeniuslair.blogspot.com
Please tell us a bit about your UAV interest
Flying robots and guidance solutions
Hometown:
Copenhagen Denmark Europastan
Activity Feed
"@Ruwan, No the assymmetry does not affect the performance. I am sure you could make it any shape and still be fine. On the second model I inverted the bottom lattice because it looks better and make the stiffness a little more uniform.
The laser…"
The laser…"
"No the frame will twist a little bit. You can control this by the number of connections between the layers.
No do don't have .dxf or .dwg at hand but i am sure you can find a way to convert."
No do don't have .dxf or .dwg at hand but i am sure you can find a way to convert."
"Here is the frame and camera pod in .hpgl format. If you don't have a laser cutter there are plenty of online services that cut for you.
If you make one please send a picture :)"
If you make one please send a picture :)"
"Everything is made from 4mm. plywood. I realize that wood may not be the strongest material but certainly the cheapest so if I have a bad landing I simply plan to replace the broken parts. All parts are easy to swap without too much problems.
I…"
I…"
First: This build can be followed in detail at: http://dzlsevilgeniuslair.blogspot.dk/Long time ago I bought all the gear needed to build a small quad. I was really busy at the time so they ended up in a box and was quickly forgotten. The other day…
"Hi everybody.
I really don't mean to be rude but:
We have all bought the hardware and should really just start using it. How about we stop whining about Invensense and start getting a working library going for the ArduIMU3.
There is partly working…"
I really don't mean to be rude but:
We have all bought the hardware and should really just start using it. How about we stop whining about Invensense and start getting a working library going for the ArduIMU3.
There is partly working…"
"I am now using the ArduIMU V3 for projects with the preliminary firmware previously discussed here.
See:
http://dzlsevilgeniuslair.blogspot.com/
And:
http://diydrones.com/profiles/blogs/rctp-a-directed-airflow-control..."
See:
http://dzlsevilgeniuslair.blogspot.com/
And:
http://diydrones.com/profiles/blogs/rctp-a-directed-airflow-control..."
"Firmware now running on ArduIMU V3!"
"A couple of build pictures from V2"
"Thanks everybody for all the good links.
It looks like there are many ways Directed Airflow Controlled Vehicles can be successfully made. With the right controller anything seem to fly.
I'm interested in making really unstable crafts fly like they…"
It looks like there are many ways Directed Airflow Controlled Vehicles can be successfully made. With the right controller anything seem to fly.
I'm interested in making really unstable crafts fly like they…"
"@david. How did you tune your loop controller?
I see that your craft has relatively large surfaces compared to its mass. I imagine this gives you a little more time to collect data before things go wrong.
The RCTP is really heavy and have small…"
I see that your craft has relatively large surfaces compared to its mass. I imagine this gives you a little more time to collect data before things go wrong.
The RCTP is really heavy and have small…"
After going over a lot of projects here on DIYDrones I realized that there are not a lot of projects involving thrust vector vehicle control.Inspired by among others the guys at Armadillo and by following my local heroes at CopenhagenSuborbitals I…
"See this thread:
http://diydrones.com/forum/topics/arduimu-v3-source-code-for-dmp"
http://diydrones.com/forum/topics/arduimu-v3-source-code-for-dmp"
"I hope this answers your question.
The ArduIMU is a microcontroller (AVR ATMEGA328p) with gyros and accelerometers attached. The micro controller can be programmed with the arduino environment.
An elaborate reference program is made in the Arduino…"
The ArduIMU is a microcontroller (AVR ATMEGA328p) with gyros and accelerometers attached. The micro controller can be programmed with the arduino environment.
An elaborate reference program is made in the Arduino…"
