"hello
i know that the thread is kind of old but i just put my hand on a new ardupilot legacy board, the thing is , not blue led bling neither no proper boot , with the lastr version online , when i set NEMA protocol...
i read somewhere that "erase device" should erase everything!!
i'll will try with arduino IDE and if that doesn't work i'll have a look in AVR to the fuses...
anyways i'll let you know
"the strange thing is that the copnfoig tool is writing corectly but still giving the error.
i'm pretty sure that i did protect only the bootloader part...
i'll give it an other try with arduino IDE but i could only use avr studio last time i tried.…"
i'm back on the project now and i would like to re program the atmega 368 to make sure the fuse are corrects...
i just baught a programer in taiwan and now if some body could give me a link on how to do that that would be great!
are you sure your GPS adapter was set to 5V and not 3V when you first tried?
is there a way you can connect the FTDI cable to your Ublox to use the Ublox config software
if you could do that then you could see if the settings are right…"